- N° de stock RS:
- 214-8080
- Référence fabricant:
- TB67H452FTG(Z,EL)
- Fabricant:
- Toshiba
2000 En stock pour livraison sous 1 jour(s)
Ajouté
Prix L'unité (sur une bobine de 2000)
2,826 €
(TVA exclue)
3,419 €
(TVA incluse)
Unité | Prix par unité | la bobine* |
2000 + | 2,826 € | 5 652,00 € |
*prix conseillé |
- N° de stock RS:
- 214-8080
- Référence fabricant:
- TB67H452FTG(Z,EL)
- Fabricant:
- Toshiba
Documentation technique
Législations et de normes
Détails du produit
The Toshiba PWM chopper type 4 ch H-bridge motor driver can drive two steppers, two DC brushed motors and one stepping motor, etc. by combining 4 ch H-bridges and it can also drive dual DC brushed motors or stepping motors for large-current drive by setting large mode. The VM power supply voltage can be used 6.3 V or more hence it is optimal for battery powered applications with 7.2 V power supply.
Monolithic IC structured by CD process
Low ON-resistance: Ron = 0.6 Ω
ON-resistance (Ron) = 0.3 Ω.
Over-current detection (ISD), thermal shutdown (TSD), and VM power-on reset circuits
Package: QFN48
Maximum output withstand voltage: 40 V (max)
Output current: 3.5 A (peak) in DC Motor (S) mode
Chopping frequency can be set by external capacitor and resistor
High-speed chopping is possible at 100 kHz or more
Low ON-resistance: Ron = 0.6 Ω
ON-resistance (Ron) = 0.3 Ω.
Over-current detection (ISD), thermal shutdown (TSD), and VM power-on reset circuits
Package: QFN48
Maximum output withstand voltage: 40 V (max)
Output current: 3.5 A (peak) in DC Motor (S) mode
Chopping frequency can be set by external capacitor and resistor
High-speed chopping is possible at 100 kHz or more
Spécifications
Attribut | Valeur |
---|---|
Motor Type | DC |
Configuration | H Bridge |
Output Configuration | PWM |
Maximum Output Current | 3.5A |
Maximum Supply Voltage | 40 V |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 48 |
- N° de stock RS:
- 214-8080
- Référence fabricant:
- TB67H452FTG(Z,EL)
- Fabricant:
- Toshiba