Parker Hydraulic End Nut 4BMTXS

  • N° de stock RS 302-8089
  • Référence fabricant 4BMTXS
  • Fabricant Parker
Documentation technique
Législations et de normes
Statut RoHS non applicable
Détails du produit

End Nut

Suitable for use with complete range of Triple-Lok flared tube fittings and hydraulic tube

//media.rs-online.com/t_line/L302777-01.jpg

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Spécifications
Attribut Valeur
For Tube Outside Diameter 6mm
Overall Length 15.8mm
Material Steel
Finish Zinc Plated
Maximum Operating Pressure 350 bar
Minimum Operating Temperature -40°C
Maximum Operating Temperature +120°C
125 En stock pour livraison sous 1 jour(s)
Prix Each (In a Pack of 5)
0,778
(TVA exclue)
0,941
(TVA incluse)
Unité
Prix par unité
le paquet*
5 - 20
0,778 €
3,89 €
25 - 45
0,746 €
3,73 €
50 - 120
0,728 €
3,64 €
125 +
0,714 €
3,57 €
*prix conseillé