Hi-Force Single, Portable Low Height Hydraulic Cylinder, HLS101, 10t, 40mm stroke
- N° de stock RS:
- 808-012
- Référence fabricant:
- HLS101
- Fabricant:
- Hi-Force
Sous-total (1 unité)*
396,16 €
(TVA exclue)
479,35 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 396,16 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 808-012
- Référence fabricant:
- HLS101
- Fabricant:
- Hi-Force
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hi-Force | |
| Stroke | 40mm | |
| Capacity | 10t | |
| Closed Height | 95mm | |
| Single/Double Acting | Single | |
| Manufacturer Series | HLS | |
| Extended Height | 135mm | |
| Cylinder Effective Area | 14.4cm² | |
| Oil Capacity | 58cm³ | |
| Outside Diameter | 70mm | |
| Maximum Operating Pressure | 10000 psi | |
| Weight | 2.4kg | |
| Sélectionner tout | ||
|---|---|---|
Marque Hi-Force | ||
Stroke 40mm | ||
Capacity 10t | ||
Closed Height 95mm | ||
Single/Double Acting Single | ||
Manufacturer Series HLS | ||
Extended Height 135mm | ||
Cylinder Effective Area 14.4cm² | ||
Oil Capacity 58cm³ | ||
Outside Diameter 70mm | ||
Maximum Operating Pressure 10000 psi | ||
Weight 2.4kg | ||
Statut RoHS non applicable
- Pays d'origine :
- GB
Low Height Cylinders
Use where collapsed height is a premier requirement in a lifting, levelling or pushing application
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity
Warning
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Low Height Cylinders
High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately