RS PRO Piston Inline Flow Switch for Liquid, 0.04 L/min Min, 0.13 L/min Max
- N° de stock RS:
- 510-0559
- Fabricant:
- RS PRO
1 En stock, livraison sous 1 jour(s) (stock Europe)
6 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
324,68 €
(TVA exclue)
392,86 €
(TVA incluse)
| Unité | Prix par unité |
| 1 + | 324,68 € |
- N° de stock RS:
- 510-0559
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- DE
Détails du produit
Piston Flow Switch
Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.
High pressure and temperature capabilities
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass
Note
If used on air system, life expectancy of the unit is greatly reduced due to instantaneous pressure loss on the piston, which has no damping.
Spécifications
Attribut | Valeur |
|---|---|
| Media Monitored | Liquid |
| Device Type | Piston Inline |
| Minimum Flow Rate | 0.04 L/min |
| Maximum Flow Rate | 0.13 L/min |
| Supply Voltage | 200 V ac |
| Pipe Diameter Range | 1/4 in |
| Connection Type | 1/4 BSP |
| Maximum Pressure | 300bar |
| Material | Brass |
| Maximum Media Temperature | +100°C |
| Maximum Operating Temperature | +120°C |
| Current Rating | 1 A |