RS PRO Carbon Steel Eye Bolt, M24 Thread, 40mm Thread Length, 77mm Internal Eye Diameter, 77mm Outer Eye Diameter, 2.5t
- N° de stock RS:
- 673-670
- Fabricant:
- RS PRO
4 En stock, livraison sous 1 jour(s) (stock Europe)
126 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
26,11 €
(TVA exclue)
31,59 €
(TVA incluse)
Unité | Prix par unité |
1 + | 26,11 € |
- N° de stock RS:
- 673-670
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- GB
Détails du produit
RS PRO Eye Bolts
These Eye Bolts from our own RS PRO brand are intended for linear pulling loads in the direction of the thread.
Features and Benefits
Galvanised steel construction
Easy to inspect for damage
Shock absorbing
High resistance to abrasion
Fatigue rated at 1 – times the working load limit at 20 000 cycles
UNC (unified coarse pitch) thread
Easy to inspect for damage
Shock absorbing
High resistance to abrasion
Fatigue rated at 1 – times the working load limit at 20 000 cycles
UNC (unified coarse pitch) thread
Applications
These Eye Bolts are suitable for wide variety of applications such as tensioning wires, securing loads and lifting applications.
Not intended for use where the load is perpendicular to the thread. This is because in these instances the bolt could unscrew and move, or it could be twisted and break.
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Note
When lifting, two or more eyebolts should be used. Safe working load detailed in 'dimensions' table;
Not intended for use where the load is perpendicular to the thread. This is because in these instances the bolt could unscrew and move, or it could be twisted and break.
Not intended for use where the load is perpendicular to the thread. This is because in these instances the bolt could unscrew and move, or it could be twisted and break.
Spécifications
Attribut | Valeur |
---|---|
Thread Size | M24 |
Thread Length | 40mm |
Eye Diameter | 77mm |
Type | Eye Bolt |
Outer Diameter | 77mm |
Working Load Limit | 2.5t |
Material | Carbon Steel |