- N° de stock RS:
- 508-728
- Référence fabricant:
- 09-3817
- Fabricant:
- Vero Technologies
1 En stock, livraison sous 1 jour(s) (stock Europe)
6 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
168,54 €
(TVA exclue)
203,93 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 168,54 € |
5 - 9 | 156,74 € |
10 + | 146,62 € |
- N° de stock RS:
- 508-728
- Référence fabricant:
- 09-3817
- Fabricant:
- Vero Technologies
Documentation technique
Législations et de normes
- Pays d'origine :
- GB
Détails du produit
64-Way Standard Extender Board
Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test.
DIN 41612 type B connectors
Solder resist coating to prevent solder bridging and finger staining
Solder resist coating to prevent solder bridging and finger staining
Supplied with
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels)
PC / VME Bus Boards
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Microboard Pattern
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
Spécifications
Attribut | Valeur |
---|---|
Type | Extender Board |
Connection | DIN 41612 |
Number of Contacts | 64 |
Base Material | Epoxy Glass Fabric Laminate |
Number of Sides | 2 |
Dimensions | 281.6 x 100 x 1.6mm |
FR Material Grade | FR4 |
Length | 281.6mm |
Thickness | 1.6mm |
Width | 100mm |
- N° de stock RS:
- 508-728
- Référence fabricant:
- 09-3817
- Fabricant:
- Vero Technologies