- N° de stock RS:
- 122-4830
- Référence fabricant:
- KSZ8061MNGW
- Fabricant:
- Microchip
352 En stock pour livraison sous 1 jour(s)
Ajouté
Prix L'unité (en paquet de 4)
2,54 €
(TVA exclue)
3,07 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
4 - 16 | 2,54 € | 10,16 € |
20 - 44 | 2,318 € | 9,272 € |
48 - 196 | 2,255 € | 9,02 € |
200 + | 2,208 € | 8,832 € |
*prix conseillé |
- N° de stock RS:
- 122-4830
- Référence fabricant:
- KSZ8061MNGW
- Fabricant:
- Microchip
Documentation technique
Législations et de normes
Détails du produit
KSZ8061M 10/100 Ethernet Transceiver
The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Features
Quiet-WIRE® Programmable EMI Filter
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Ethernet Communications - Microchip
Spécifications
Attribut | Valeur |
---|---|
IC Type | Transceiver IC |
Number of Transceivers | 1 |
Data Rate | 10 Mbps, 100Mbps |
Standard Supported | IEEE 802.3az |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 48 |
Typical Operating Supply Voltage | 3.3 V |
Dimensions | 7 x 7 x 0.8mm |
Maximum Operating Temperature | +105 °C |
Minimum Operating Temperature | -40 °C |