TRACOPOWER THD 15-1210N, Dual-Channel, DC-DC DC-DC Converter, 4A 9-Pin, DIP-24

15W single/dual output regulated isolated high performance DC-DC converters with a shielded metal case and wide input voltage range. These isolated high performance DC-DC converters have a high efficiency and draw a low input current at no load conditions. Typical applications for these isolated high performance DC-DC converters include mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics.

DIP 24 metal package
Highest power density
Wide 2:1 input range
Very high efficiency up to 90 %
Operating temperature range –40 °C to +85 °C
I/O isolation 1500 Vdc
Under voltage lockout
Short circuit protection
Input filter to meet EN 55022, class A
Remote On/Off
Industry standard pinout

MTBF to MIL-HDBK-217F, @ +25°C
For suitable common mode choke see stock number 745-1187

UL /cUL 60950-1, EN 60950-1, IEC 60950-1

The TRACOPOWER series models provide 15 Watt output power out of a very compact shielded metal case that occupies only 1 inch² of board space. The converters work with a high efficiency over the full load range and draw a very low input current at no load conditions. All models have a wide 2:1 input voltage range and a precisely regulated output voltage. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical

Highest power density
Shielded metal case with isolated Baseplate
Very high efficiency
No minimum load required
Industry standard pinout