- N° de stock RS:
- 241-4732
- Fabricant:
- RS PRO
39 En stock pour livraison sous 1 jour(s)
Ajouté
Prix la pièce
101,16 €
(TVA exclue)
122,40 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 101,16 € |
5 - 24 | 85,99 € |
25 + | 70,81 € |
- N° de stock RS:
- 241-4732
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- GB
Détails du produit
RS PRO Crimp Die Set, Terminal
RS PRO crimping dies are tools you can use to connect your open wires to crimp-pin connectors. The dies work by tightly squeezing the pin connector and puncturing the connector holding the wires, to make sure they connect and stay connected.
These versatile dies are suitable for terminal sizes of 16 mm², 25 mm², 35 mm² and 50 mm², which means you can use them with a range of wire types. Crimping tools like these dies are often used in metalworking. You can also find them in applications where crimp-pin connectors are commonly used.
The connector pins are handled and packed in accordance with electrostatic discharge (ESD) ANSI/ESD S20.20:2014 and with British (BS EN 61340-5-1:2007) and American (ANSI/ESD S20.20:2014) electrostatic discharge (ESD) requirements. This means you can rest assured that the risk of electrostatic discharge is reduced to a minimum.
These versatile dies are suitable for terminal sizes of 16 mm², 25 mm², 35 mm² and 50 mm², which means you can use them with a range of wire types. Crimping tools like these dies are often used in metalworking. You can also find them in applications where crimp-pin connectors are commonly used.
The connector pins are handled and packed in accordance with electrostatic discharge (ESD) ANSI/ESD S20.20:2014 and with British (BS EN 61340-5-1:2007) and American (ANSI/ESD S20.20:2014) electrostatic discharge (ESD) requirements. This means you can rest assured that the risk of electrostatic discharge is reduced to a minimum.
Features and Benefits
• Terminal crimp connector type
• Maximum wire size of 50 mm²
• Minimum wire size of 16 mm²
• Uninsulated
• Maximum wire size of 50 mm²
• Minimum wire size of 16 mm²
• Uninsulated
Spécifications
Attribut | Valeur |
---|---|
Crimp Connector Type | Terminal |
Minimum Wire Size mm² | 16mm² |
Maximum Wire Size mm² | 50mm² |
Terminal Insulation | Uninsulated |