Schneider Electric, DZ5CA Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 1.1mm Pin Diameter, 0.25mm² Wire Size,
- N° de stock RS:
- 254-6564
- Référence fabricant:
- DZ5CA002
- Fabricant:
- Schneider Electric
Produit discontinué
- N° de stock RS:
- 254-6564
- Référence fabricant:
- DZ5CA002
- Fabricant:
- Schneider Electric
Législations et de normes
- Pays d'origine :
- FR
Détails du produit
Marker end caps
Cable ends comprising a tinned copper tube with a moulded isolating collar at the end.
The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.
These ends are available for conductors with cross-sections from 0.5 → 16 mm2, in different colours.
Ends are packaged in small packets of 100 pieces.
The moulded section of the cable end allows the user to identify wires.
The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.
These ends are available for conductors with cross-sections from 0.5 → 16 mm2, in different colours.
Ends are packaged in small packets of 100 pieces.
The moulded section of the cable end allows the user to identify wires.
Standards
NF C 63-023
DIN 46228
DIN 46228
Spécifications
Attribut | Valeur |
---|---|
Maximum Wire Size mm² | 0.25mm² |
Pin Diameter | 1.1mm |
Insulation Material | Plastic |
Number of Entries | 1 |
Colour | Yellow |
Pin Length | 8mm |
Insulation | Insulated |
Maximum Wire Size AWG | 26AWG |
Overall Length | 35mm |
Series | DZ5CA |