- N° de stock RS:
- 546-4516
- Fabricant:
- RS PRO
11 En stock, livraison sous 1 jour(s) (stock Europe)
3542 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
6,65 €
(TVA exclue)
8,05 €
(TVA incluse)
Unité | Prix par unité |
1 - 9 | 6,65 € |
10 - 24 | 5,99 € |
25 - 49 | 5,41 € |
50 - 99 | 4,87 € |
100 + | 4,40 € |
- N° de stock RS:
- 546-4516
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- TW
Détails du produit
PCB mounting sockets
RS PRO Right Angle PCB BNC Jack
From RS PRO, this right angle BNC connector is designed for use with coaxial cables. It is PCB mounting for wire-to-board applications.
The connector has a robust silver plated body, and features the secure and convenient bayonet coupling system typical of a BNC connector. The centre pin contact is silver plated, for excellent conductivity. There is also a PTFE insulator for increased reliability.
Features and Benefits
90° BNC Connector
Brass body material provides a heavy-duty build quality
Silver contacts ensures efficiency
PCB terminating
50Ω impedance
Operating frequency of 4GhZ
Insulation material: PTFE
Applications
BNC connectors are used in a variety of RF signal applications. Though they are most commonly used in radio and television broadcast applications, they can also be used in medical and test equipment.
Antenna connection
Cable Modems
Telecom
Medical Equipment
Satcom
CCTV
Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
The connector has a robust silver plated body, and features the secure and convenient bayonet coupling system typical of a BNC connector. The centre pin contact is silver plated, for excellent conductivity. There is also a PTFE insulator for increased reliability.
Features and Benefits
90° BNC Connector
Brass body material provides a heavy-duty build quality
Silver contacts ensures efficiency
PCB terminating
50Ω impedance
Operating frequency of 4GhZ
Insulation material: PTFE
Applications
BNC connectors are used in a variety of RF signal applications. Though they are most commonly used in radio and television broadcast applications, they can also be used in medical and test equipment.
Antenna connection
Cable Modems
Telecom
Medical Equipment
Satcom
CCTV
Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Approvals
-
RS Silver Plated BNC
Brass-bodied connectors with PTFE insulators and beryllium copper female contacts. Available in crimp or clamp options. For information regarding appropriate crimp tooling please refer to the Connector/Cable/Tooling Compatability table at the beginning of this section. Cut-outs are illustrated for respective connector types.,Miniature bulkhead socket also available (which does not mate with standard BNC connectors).
Spécifications
Attribut | Valeur |
---|---|
Gender | Female |
Coaxial Connector Type | BNC Connector |
Mounting Type | PCB Mount |
Impedance | 50Ω |
Termination Method | Through Hole |
Body Orientation | Right Angle |
Bulkhead | No |
Operating Frequency | 4GHz |
Body Plating | Silver |
Polarity | Normal |
Contact Material | Copper |
Contact Plating | Silver |