Eaton 1A T Glass Cartridge Fuse, 6.3 x 32mm
- N° de stock RS:
- 412-481
- Référence fabricant:
- TDC11-1A
- Fabricant:
- Eaton
Offre groupée disponible
Prix L'unité (en paquet de 10)
2,883 €
(TVA exclue)
3,488 €
(TVA incluse)
40 En stock, livraison sous 1 jour(s) (stock Europe)
190 En stock, livraison sous 3 à 5 jours (stock Europe)
Unité | Prix par unité | le paquet* | |
10 - 40 | 2,883 € | 28,83 € | |
50 - 90 | 2,739 € | 27,39 € | |
100 - 490 | 2,538 € | 25,38 € | |
500 + | 2,416 € | 24,16 € | |
*prix conseillé |
- N° de stock RS:
- 412-481
- Référence fabricant:
- TDC11-1A
- Fabricant:
- Eaton
Non conforme
- Pays d'origine :
- CN
Glass Body - (T) LBC
Glass tube fuses are available in with fast acting and time delay characteristics which makes them suitable for a variety of different applications.
Glass cartridge fuses are ideal for providing protection to devices or internal circuits from short circuits and overcurrent. They are deliberately weaker components which, when too much current is drawn, will blow. Once the fuse has blown it will need replacing in order to make the circuit complete and allow the flow of current.
Features:
Glass cartridge
6.3mm x 21 mm cartridge size
T Speed Rating
Low Breaking Capacity
Typical applications:
Cartridge fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent and can be used to protect electrical appliances such as motors air-conditions, refrigerator, pumps etc. They can be found in the following areas:
Industrial
Commercial
Home/Residential
Automotive
Additional Information:
What size is it?
6.3 x 32mm is a miniature cartridge size. Miniature fuses are ideal for the protection of electrical appliances, electronic equipment and component parts.
Why choose a glass fuse?
Glass and ceramic fuses have similar properties. However you may choose a glass fuse as it enables you to see the inside of the fuse. Therefore it is easier to determine whether the fuse has blown.
What are fuses used for?
• For the protection of components and equipment from costly damage caused by over-current.
• To isolate sub-systems from the main system once a fault has appeared
What is an over-current?
It is a setting where a circuit experiences a current that is higher than the normal operating current.
What Speed is it?
This particular fuse is T speed rated which means it is a slow acting fuse, sometimes referred to as anti-surge. It is able to tolerate higher levels for a short period, without shorting. Therefore, if a sudden change occurs, this fuse will not blow immediately. They are suitable for applications where a sudden flow of high current is required.
What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is LBC (Low Breaking Capacity).
Features:
Glass cartridge
6.3mm x 21 mm cartridge size
T Speed Rating
Low Breaking Capacity
Typical applications:
Cartridge fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent and can be used to protect electrical appliances such as motors air-conditions, refrigerator, pumps etc. They can be found in the following areas:
Industrial
Commercial
Home/Residential
Automotive
Additional Information:
What size is it?
6.3 x 32mm is a miniature cartridge size. Miniature fuses are ideal for the protection of electrical appliances, electronic equipment and component parts.
Why choose a glass fuse?
Glass and ceramic fuses have similar properties. However you may choose a glass fuse as it enables you to see the inside of the fuse. Therefore it is easier to determine whether the fuse has blown.
What are fuses used for?
• For the protection of components and equipment from costly damage caused by over-current.
• To isolate sub-systems from the main system once a fault has appeared
What is an over-current?
It is a setting where a circuit experiences a current that is higher than the normal operating current.
What Speed is it?
This particular fuse is T speed rated which means it is a slow acting fuse, sometimes referred to as anti-surge. It is able to tolerate higher levels for a short period, without shorting. Therefore, if a sudden change occurs, this fuse will not blow immediately. They are suitable for applications where a sudden flow of high current is required.
What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is LBC (Low Breaking Capacity).
Note
All fuses 6.3mm (0.25in) diameter and 32mm (1.25in) in length.
Eaton Cartridge Fuse, 350V AC Voltage Rating, 10A Breaking Capacity - TDC11-1A
Keep your electrical circuits ticking over safely with this cartridge fuse from Eaton. It's a slow-acting type with a time delay function, meaning it's designed to handle temporary current surges that could otherwise cause nuisance tripping. The body's made of glass and the endcaps are electroplated brass, so the fuse holds its own against mechanical impact and corrosion. A standard size of 32 (length) x 6.3mm (diameter) means you'll have no trouble fitting it into a compact setup.
Features & Benefits
• Voltage rating of 350V AC and current rating of 1A for use in low-powered applications
• Transparent body helps you to monitor and determine when the fuse has blown
• Lead-free construction for user and environmental safety
• Transparent body helps you to monitor and determine when the fuse has blown
• Lead-free construction for user and environmental safety
Where can I install the cartridge fuse?
You can install this device into an Eaton fuse holder, block or fuse clip, so it's a versatile piece of kit.
What's the breaking capacity of this unit?
This hardy fuse has a breaking capacity of 10A at its maximum voltage rating. This means it can handle ten times its rated current without failing or being damaged.
Note
Eaton formerly known as Bussmann
Approvals
-
Attribut | Valeur |
---|---|
Current Rating | 1A |
Fuse Size | 6.3 x 32mm |
Fuse Speed | T |
Voltage Rating | 350V ac |
Body Material | Glass |
Fuse Standard | BS2950A |