INA Yoke Cam Follower NATV10-X-PP-A 10mm ID, 30 mm OD
- N° de stock RS:
- 191-3812
- Référence fabricant:
- NATV10-X-PP-A
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
73,87 €
(TVA exclue)
89,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 19 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 73,87 € |
| 5 - 9 | 70,93 € |
| 10 - 24 | 69,44 € |
| 25 + | 67,96 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-3812
- Référence fabricant:
- NATV10-X-PP-A
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Roller Diameter | 30mm | |
| Product Type | Cam Follower | |
| Sub Type | Yoke | |
| Bore Diameter | 10mm | |
| Static Load Rating | 14.9kN | |
| Dynamic Load Rating | 9.5kN | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Roller Diameter 30mm | ||
Product Type Cam Follower | ||
Sub Type Yoke | ||
Bore Diameter 10mm | ||
Static Load Rating 14.9kN | ||
Dynamic Load Rating 9.5kN | ||
Standards/Approvals No | ||
Are ready-to-fit needle or cylindrical roller bearings of single or double row design
Are mounted on shafts or studs (yoke type track rollers) or supplied with a heavy-section roller stud with fixing thread and a mounting aid (stud type track rollers)
Have particularly thick-walled outer rings with a crowned outside surface
Can support high radial loads
Tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts
Are available with or without an inner ring (yoke type track rollers)
Are produced with or without axial guidance of the outer ring (stud type track rollers are always produced with axial guidance)
Are open or sealed on both sides
Are not mounted in a housing bore, but are supported on a flat mating track
Can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction
Liens connexes
- INA Yoke Cam Follower NATV10-PP-A 10mm ID, 30 mm OD
- INA Yoke Cam Follower NATR10-X-PP-A 10mm ID, 30 mm OD
- INA Roller and Plain Yoke Cam Follower NATR10-PP-A 10mm ID, 30 mm OD
- INA Yoke Cam Follower NA2200-2RSR 10mm ID, 30 mm OD
- INA Yoke Cam Follower LR2002RSR 10mm ID, 32 mm OD
- INA Yoke Cam Follower LR50002RS 10mm ID, 28 mm OD
- NTN Needle Roller Roller Follower Cam Follower NATV10/3AS 10mm ID, 30 mm OD
- INA Yoke Cam Follower NATV5-PP-A 5mm ID, 16 mm OD