Automotive Connector Terminals

Automotive connector terminals are standardised wire connectors made to provide a quick and simple connection point for one or more wires together to create robust and functional cable solutions. Different securing methods can be used for specific applications and across different industries. Quick latch connections for terminals that may need frequent maintenance or are often connected and disconnected or screw down terminals for a more long-term and robust application whilst still allowing flexibility in their use and reliability every time.


Electrical connectors used in applications such as cars, motorcycles and motorhomes have to be durable and reliable as they are most commonly used in parts of a vehicle that are exposed to the elements and excessive wear. Typically, automotive connector terminals are very well sealed against dust ingress and moisture, and usually have a high degree of heat resistance. Due to the excessive vibration of being installed in a vehicle, these connectors will often have secure locking systems built into the plug and socket to prevent unwanted disconnect.


Termination Types


Terminal blocks may use a variety of methods to achieve a robust and reliable wire connection.


Spring clamps


Spring clamp connections simply use the pressure of a spring to press down and retain the wire in place. Spring clamps are useful in applications using small wire diameters without the need for high strength connections as well as for use in a limited working space where screwing terminals down may be difficult.


Screw clamps


Similar to a spring clamp, use pressure to hold a wire in place but can achieve greater clamping pressure with the use of a screw to tighten the clamp over the wire. This method of electrical connection is the most classic and industry-standard termination method. This type can accommodate a very wide range of wire sizes and provides a reliable connection.


Insulation displacement connections (IDC) are a simple and easy connection method that is achieved by pushing the wire between two sharp pieces of metal, that can break the outer sheathing to allowing a connection to be made without exposing any bare wire.


Applications


Automotive connector terminals come in both pre-insulated and non-insulated forms and are suitable for use in a wide range of both commercial and industrial applications. Whether its connecting a fuse, a battery terminal or even a vehicle sensor, our range of terminals allow for easy often modular applications at a range of voltages both high and low. Terminal kits can be a great way to ensure you have a range of terminal sizes suitable for almost any situation big or small.


...
Voir plus Voir moins

Filtres

Afficher 1 - 20 des 68 produits
Nombre de résultats par page
Description Prix Type Series Gender Pitch Contact Plating Contact Material Depth Colour Number of Contacts Diameter Corded Current Rating Mounting Type Termination Method
N° de stock RS 923-2161
Référence fabricant12048074
MarqueDelphi
0,055 €
Each (On a Reel of 3000)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 801-0957
Référence fabricant12048074
MarqueDelphi
0,15 €
Each (In a Pack of 100)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 801-0963
Référence fabricant12077628
MarqueDelphi
0,179 €
Each (In a Pack of 100)
Unité
- Metri-Pack 150 Male - - - - - - - - - - -
N° de stock RS 923-2158
Référence fabricant12084200
MarqueDelphi
0,055 €
Each (On a Reel of 3000)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 801-0951
Référence fabricant12084200
MarqueDelphi
0,164 €
Each (In a Pack of 100)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 923-2168
Référence fabricant12077628
MarqueDelphi
0,056 €
Each (On a Reel of 2800)
Unité
- Metri-Pack 150 Male - - - - - - - - - - -
N° de stock RS 801-1095
Référence fabricant12124075
MarqueDelphi
0,335 €
Each (In a Pack of 100)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 801-1099
Référence fabricant12124076
MarqueDelphi
0,243 €
Each (In a Pack of 100)
Unité
- Metri-Pack 150.2 Female - - - - - - - - - - -
N° de stock RS 923-2256
Référence fabricant12124075
MarqueDelphi
0,143 €
Each (On a Reel of 3500)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 923-2259
Référence fabricant12124076
MarqueDelphi
0,143 €
Each (On a Reel of 3500)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 896-1912
Référence fabricant12052456
MarqueDelphi
0,932 €
Each (In a Pack of 20)
Unité
Terminal Metri-Pack 630 Female - - - - - - - - - - -
N° de stock RS 801-1008
Référence fabricant12129484
MarqueDelphi
0,129 €
Each (In a Pack of 100)
Unité
- Metri-Pack 150 Female - - - - - - - - - - -
N° de stock RS 923-2196
Référence fabricant12129484
MarqueDelphi
0,055 €
Each (On a Reel of 4500)
Unité
- Metri-Pack 150 Male - - - - - - - - - - -
N° de stock RS 923-2073
Référence fabricant12089188
MarqueDelphi
0,111 €
Each (On a Reel of 2200)
Unité
- Weather-Pack Female - - - - - - - - - - -
N° de stock RS 896-1830
Référence fabricant12191819
MarqueDelphi
0,154 €
Each (In a Pack of 100)
Unité
- GT150 Female - - - - - - - - - - -
N° de stock RS 801-0803
Référence fabricant12089188
MarqueDelphi
0,26 €
Each (In a Pack of 100)
Unité
- Weather-Pack Female - - - - - - - - - - -
N° de stock RS 896-1916
Référence fabricant12064737
MarqueDelphi
0,494 €
Each (In a Pack of 50)
Unité
Terminal Metri-Pack 630 Male - - - - - - - - - - -
N° de stock RS 771-0230
Référence fabricant211CC2S1160P
MarqueDelphi
0,103 €
Each (In a Pack of 100)
Unité
- Sicma-3 Female - Tin Copper Iron Alloy - - - - - - - Crimp
N° de stock RS 896-1821
Référence fabricant12191818
MarqueDelphi
0,13 €
Each (In a Pack of 100)
Unité
- GT150 Female - - - - - - - - - - -
N° de stock RS 923-2082
Référence fabricant12089040
MarqueDelphi
0,111 €
Each (On a Reel of 2200)
Unité
- Weather-Pack Male - - - - - - - - - - -