John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit
- N° de stock RS:
- 706-8586
- Référence fabricant:
- MTL10/PD
- Fabricant:
- John Drummond
Produit discontinué
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 706-8586
- Référence fabricant:
- MTL10/PD
- Fabricant:
- John Drummond
Législations et de normes
Statut RoHS : Exempté
- Pays d'origine :
- PH
Détails du produit
Drummond MTL10 Test Lamp and Proving Unit Safety Kit
Voltage level indicator & proving unit safety kit comprising:
MTL10 Drummond Test Lamp
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
PD440 Proving Unit:
Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
Supplied with
Handy carry case, right angled probe tip, two straight tips and instructions
Mains Voltage Indicators - Contact
Spécifications
Attribut | Valeur |
|---|---|
| Test Current Rating | 3.5mA |
| Output Voltage | 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc |
| Power Source | Mains |
| Dimensions | 213 x 112 x 72mm |
| Weight | 320g |
| Height | 72mm |
| Length | 213mm |
| Maximum Operating Temperature | +55°C |
| Minimum Operating Temperature | -10°C |
| Width | 112mm |