FTDI Chip FT601Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 76-Pin QFN
- N° de stock RS:
- 146-6836
- Référence fabricant:
- FT601Q-B-T
- Fabricant:
- FTDI Chip
Article en cours d'approvisionnement. Merci de bien vouloir nous contacter.
Ajouté
Prix L'unité (dans un plateau de 260)
6,195 €
(TVA exclue)
7,496 €
(TVA incluse)
| Unité | Prix par unité | le plateau* |
| 260 + | 6,195 € | 1 610,70 € |
| *prix conseillé | ||
- N° de stock RS:
- 146-6836
- Référence fabricant:
- FT601Q-B-T
- Fabricant:
- FTDI Chip
Documentation technique
Législations et de normes
Détails du produit
Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Spécifications
Attribut | Valeur |
|---|---|
| Number of Transceivers | 2 |
| Data Rate | 480 Mbps, 5Gbit/s |
| Protocols Supported | USB 2.0, USB 3.0 |
| IC Type | Transceiver IC |
| Power Supply Type | Single |
| ESD Protection | Yes |
| Typical Single Supply Voltage | 3.3 V |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 76 |
| Dimensions | 9.1 x 9.1 x 0.95mm |
| Height | 0.95mm |
| Length | 9.1mm |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Temperature | -40 °C |
| Width | 9.1mm |
- N° de stock RS:
- 146-6836
- Référence fabricant:
- FT601Q-B-T
- Fabricant:
- FTDI Chip