- N° de stock RS:
- 254-8144
- Référence fabricant:
- DX02002
- Fabricant:
- Catu
En cours d'approvisionnement - expédition le 21/05/2024, livraison sous 1 jour(s)
Ajouté
Prix L'unité (en paquet de 2)
26,935 €
(TVA exclue)
32,591 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
2 + | 26,935 € | 53,87 € |
*prix conseillé |
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 254-8144
- Référence fabricant:
- DX02002
- Fabricant:
- Catu
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- FR
Détails du produit
Pointest test probes
Test probes offering ease of use and complete safety.
These probes are fully compatible with all 4 mm diameter safety terminals.
The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the connections at the bottom of the recess to a depth of 26mm, where traditionalprobes cannot operate.
Available in pairs (red and black) in a version with 4-mm retractable plug or 1.2 metre lead.
These probes are fully compatible with all 4 mm diameter safety terminals.
The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the connections at the bottom of the recess to a depth of 26mm, where traditionalprobes cannot operate.
Available in pairs (red and black) in a version with 4-mm retractable plug or 1.2 metre lead.
Application
Safety cords for test lead points for measuring devices.
Features
CAT III 1 000 V.
Hand guard (for test lead points).
Compatible with standard Ø 4 mm connections.
Retractable sheathing. Contact point on elastic cage Ø 4 mm.
Double-insulated flexible wires 1.20 m length and 1 mm² cross section on Ø 4 mm IP2X elbow end pieces.
Hand guard (for test lead points).
Compatible with standard Ø 4 mm connections.
Retractable sheathing. Contact point on elastic cage Ø 4 mm.
Double-insulated flexible wires 1.20 m length and 1 mm² cross section on Ø 4 mm IP2X elbow end pieces.
Approvals
IEC 1010
Spécifications
Attribut | Valeur |
---|---|
Lead Type | Test Probe |
Lead Length | 1.2m |
Current Rating | 20A |
Safety Category Voltage | 1000V |
Safety Category | CAT III 1000V |
Safety Category Level | CAT III |