TRACOPOWER Switching Regulator, Through Hole, ±2.5V dc Output Voltage, 4.6 → 32 V dc, 4.6 → 42 V dc Input
- N° de stock RS:
- 166-5662
- Référence fabricant:
- TSRN 1-2425
- Fabricant:
- TRACOPOWER
3 En stock pour livraison sous 1 jour(s)
Ajouté
Prix 1 ruban de 10
115,42 €
(TVA exclue)
139,66 €
(TVA incluse)
Tube(s) | le tube | Prix par unité* |
1 - 4 | 115,42 € | 11,542 € |
5 - 9 | 111,96 € | 11,196 € |
10 - 24 | 108,49 € | 10,849 € |
25 - 49 | 103,88 € | 10,388 € |
50 + | 99,26 € | 9,926 € |
*prix conseillé |
- N° de stock RS:
- 166-5662
- Référence fabricant:
- TSRN 1-2425
- Fabricant:
- TRACOPOWER
Documentation technique
Législations et de normes
- Pays d'origine :
- TW
Détails du produit
Traco 1A SIP Step Down Switching Regulator - TSRN-1 Series
TSRN-1 Series 1A step-down switching regulators with a wide input voltage range of up to 42 Vdc and a high efficiency of up to 95% which allows full load operation without the need for a heatsink or forced air cooling. These TSRN-1 Series 1A step-down switching regulators are suitable for positive and negative output circuits (please refer to table for additional data). Excellent line and load regulation and a low standby current makes these TSRN-1 switching regulators ideal for use in energy sensitive applications.
Input voltage range up to 42 VDC
Built in filter capacitors
No heat-sink required
Over-temperature and short circuit protection
Low standby current: 1 mA for <= 3.3 Vdc output models, 3 mA for >= 5.0 Vdc ouput models
SIP package fits existing TO-220 footprint
Pin compatible with LMxx linear regulators
Built in filter capacitors
No heat-sink required
Over-temperature and short circuit protection
Low standby current: 1 mA for <= 3.3 Vdc output models, 3 mA for >= 5.0 Vdc ouput models
SIP package fits existing TO-220 footprint
Pin compatible with LMxx linear regulators
Note
Part numbers: TSRN 1-xxxx have straight pins
Part numbers: TSRN 1-xxxxA have angular pins
MTBF: MIL-HDBK-217 @ +25°C
Derating: 2.7 %/K above +70°C
For input voltages higher then 36 Vdc an input capacitor 22 μF/ 50 V is required
Part numbers: TSRN 1-xxxxA have angular pins
MTBF: MIL-HDBK-217 @ +25°C
Derating: 2.7 %/K above +70°C
For input voltages higher then 36 Vdc an input capacitor 22 μF/ 50 V is required
Spécifications
Attribut | Valeur |
---|---|
Output Voltage | ±2.5V dc |
Output Current | 1 A, 600 mA |
Input Voltage | 4.6 → 32 V dc, 4.6 → 42 V dc |
Mounting Type | Through Hole |
Number of Outputs | 1 |
Package | SIP |
Efficiency | 74%, 75% |
Ripple And Noise | 50mV Pk-Pk |
Maximum Temperature | +85°C |
Minimum Temperature | -40°C |
Line Regulation | ±0.2% |
Width | 7.5mm |
Length | 11.7mm |
Weight | 1.9kg |
Load Regulation | ±0.4% |
Depth | 10.2mm |
MTBF | 6000000h |