- N° de stock RS:
- 191-3879
- Référence fabricant:
- GE40-DO-2RS
- Fabricant:
- INA
21 En stock pour livraison sous 1 jour(s)
Ajouté
Prix la pièce
46,89 €
(TVA exclue)
56,74 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 46,89 € |
5 - 9 | 45,01 € |
10 - 24 | 44,08 € |
25 + | 43,14 € |
- N° de stock RS:
- 191-3879
- Référence fabricant:
- GE40-DO-2RS
- Fabricant:
- INA
Documentation technique
Législations et de normes
Détails du produit
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Spécifications
Attribut | Valeur |
---|---|
Bore Size | 40mm |
Outside Diameter | 62mm |
Static Radial Load Rating | 496000N |