- N° de stock RS:
- 488-1279
- Fabricant:
- RS PRO
2600 En stock, livraison sous 1 jour(s) (stock Europe)
2000 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix L'unité (en paquet de 100)
0,095 €
(TVA exclue)
0,115 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
100 - 400 | 0,095 € | 9,50 € |
500 - 2400 | 0,081 € | 8,10 € |
2500 + | 0,071 € | 7,10 € |
*prix conseillé |
- N° de stock RS:
- 488-1279
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- TW
Détails du produit
RS PRO Uninsulated Spade Connector, 6.35 mm x 0.8 mm Tab Size, 0.5 mm² to 1 mm²
Use this spade connector to link up single wires to relays or components, or in any situation where you need to make fast, reliable connections. This spade connector is made to fit 6.3 mm receptacles and its design allows terminals to be connected and disconnected while the bolt is still partially screwed in.
Tin-plated brass contacts provide extra strength and conductivity and are resistant to corrosion, oxidation and degradation. The connector is designed for crimp termination, which lets you create mechanically strong solder-free joints using just a pair of pliers. It's a method that's suited for large and small cross-section wires, which can be easily slotted into the component once the other wire has been crimped on the opposite end.
This spade connector is most commonly found in automotive electronics applications and domestic appliances such as dishwashers.
Tin-plated brass contacts provide extra strength and conductivity and are resistant to corrosion, oxidation and degradation. The connector is designed for crimp termination, which lets you create mechanically strong solder-free joints using just a pair of pliers. It's a method that's suited for large and small cross-section wires, which can be easily slotted into the component once the other wire has been crimped on the opposite end.
This spade connector is most commonly found in automotive electronics applications and domestic appliances such as dishwashers.
Features and Benefits
• Uninsulated spade connector
• Wire size range of 1 mm² to 0.5 mm², 16 AWG to 14 AWG
• Length of 20 mm
• Tab width of 6.35 mm
• Tab thickness of 0.8 mm
• Male connector
• Unshrouded
• Crimp termination method
• Brass contacts, tin-plated
• Wire size range of 1 mm² to 0.5 mm², 16 AWG to 14 AWG
• Length of 20 mm
• Tab width of 6.35 mm
• Tab thickness of 0.8 mm
• Male connector
• Unshrouded
• Crimp termination method
• Brass contacts, tin-plated
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Small Pack Size
Per Unit, RS stock no: 488-1279
Large Pack Size
RS stock no: 270-7471
Spécifications
Attribut | Valeur |
---|---|
Type | Tab |
Minimum Wire Size mm² | 0.5mm² |
Gender | Male |
Maximum Wire Size mm² | 1mm² |
Tab Size | 6.35 x 0.8mm |
Tab Width | 6.35mm |
Tab Thickness | 0.8mm |
Insulation | Uninsulated |
Maximum Wire Size AWG | 14AWG |
Minimum Wire Size AWG | 16AWG |
Termination Method | Crimp |
Contact Material | Brass |
Contact Plating | Tin |
Overall Length | 20mm |
Shrouded/Unshrouded | Unshrouded |