Vous avez été redirigé(e) vers RS Belgique
Distrelec a fusionné avec RS Group afin de vous proposer une gamme de produits plus étendue, une assistance locale et des services de pointe.
Weller LHT E 6.7 mm Chisel 25 mm Soldering Iron Tip for use with WSP 150
- N° de stock RS:
- 361-0868
- Numéro d'article Distrelec:
- 304-00-015
- Référence fabricant:
- T0054445199
- Fabricant:
- Weller
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
14,59 €
(TVA exclue)
17,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 383 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 14,59 € |
| 10 - 19 | 14,05 € |
| 20 - 49 | 13,64 € |
| 50 + | 13,24 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 361-0868
- Numéro d'article Distrelec:
- 304-00-015
- Référence fabricant:
- T0054445199
- Fabricant:
- Weller
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Weller | |
| Product Type | Soldering Iron Tip | |
| Tip Shape | Chisel | |
| Model Number | LHT E | |
| For Use With | WSP 150 | |
| Tip Series | LHT | |
| Tip Width | 6.7 mm | |
| Tip Length | 25mm | |
| Standards/Approvals | UPC | |
| Sélectionner tout | ||
|---|---|---|
Marque Weller | ||
Product Type Soldering Iron Tip | ||
Tip Shape Chisel | ||
Model Number LHT E | ||
For Use With WSP 150 | ||
Tip Series LHT | ||
Tip Width 6.7 mm | ||
Tip Length 25mm | ||
Standards/Approvals UPC | ||
Weller Soldering Iron Tip, 25mm Tip Length, 6.7mm Tip Width - T0054445199
This soldering iron tip is a replacement accessory designed for use with a compatible handheld station, providing a shaped working end for heat transfer in assembly and repair tasks. It is intended for tasks requiring a flat, broad contact edge and is suitable where a durable screwdriver-style tip is needed for soldering components.
Features and Benefits:
• Screwdriver-shaped end for improved joint contact and heat spread
• UPC-approved component for standardised acceptance in systems
• Short thermal mass for controlled heating response
• Robust construction supporting repeated solder cycles
• Compatible geometry for secure fit with matching holders
• UPC-approved component for standardised acceptance in systems
• Short thermal mass for controlled heating response
• Robust construction supporting repeated solder cycles
• Compatible geometry for secure fit with matching holders
Applications
• Suitable for repair of mechanical connector joints
• Ideal for soldering larger through‑hole components
• Used with a specific handpiece requiring screwdriver tips
• Can be used for desoldering tasks needing broad contact
• Appropriate for workshop maintenance of electronic assemblies
• Ideal for soldering larger through‑hole components
• Used with a specific handpiece requiring screwdriver tips
• Can be used for desoldering tasks needing broad contact
• Appropriate for workshop maintenance of electronic assemblies
What length of working end does it provide?
The working end extends 25mm from the mounting face to the tip edge, giving a defined reach for accessing recessed joints.
What is the tip width and how does that affect heat transfer?
The contact face measures 6.7mm across, increasing surface area to distribute heat over larger solder pads and reduce local overheating.
Which handpiece fittings is it intended to mate with?
It is manufactured to match the mechanical interface of a specific hot‑air and iron combination designed for this tip shape, ensuring correct seating and alignment.
Is this tip intended for general electronics or heavier tasks?
The shaped contact and dimensions are suited to heavier contact areas and component leads where broader heat application is required.
Liens connexes
- Weller LHT D45 5 mm Bevel Soldering Iron Tip for use with WSP 150
- Weller LHT EX 7 mm Screwdriver Soldering Iron Tip for use with WSP 150
- Weller LHT DX 5 mm Screwdriver Soldering Iron Tip for use with WSP 150
- Weller LHT 9.3 mm Screwdriver 0.9 in Soldering Iron Tip for use with WSP 150
- Weller LHT D 4.7 mm Screwdriver 25 mm Soldering Iron Tip for use with WSP 150
- Weller LHT C 3.2 mm Screwdriver 0.9 in Soldering Iron Tip for use with WSP 150
- Weller LHT FX 9 mm Bent Screwdriver 9.2 mm Soldering Iron Tip for use with WSP 150
- Weller Soldering Accessory Soldering Iron Heating Element, for use with WSP 80 Soldering Iron