Schneider Electric Single/Dual-Channel Safety Switch/Interlock Safety Relay, 24V ac/dc, 3 Safety Contacts
- N° de stock RS:
- 360-4352
- Référence fabricant:
- XPSAF5130P
- Fabricant:
- Schneider Electric
Produit discontinué
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 360-4352
- Référence fabricant:
- XPSAF5130P
- Fabricant:
- Schneider Electric
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- ID
Détails du produit
Schneider Electric | Preventa XPSAF Series | Safety Relays
Simple and effective safety monitoring has never been more crucial in today's highly automated world. Prevention is key to site safety, that's why Schneider Electric offers a Safety Relay in the form of the 'Preventa XPSAF' module that is second to none. Being able to monitor faults with devices along a circuit has the power to stop emergency situations from even occurring.
Features and benefits:
• Single-channel with 3 N/O safety outputs
• Monitoring of a movable guard, with emergency stop monitoring 1 or 2 channel wiring usable.
• Configurable type of start is readily available for the type of activation you wish for your circuit.
• Monitoring of single safety functions, providing an automated solution for use with applications such as emergency push stop buttons or switches.
• Unlimited synchronisation between time inputs.
• Slin in design, with just 22.5mm of width meaning it can fit nicely even in space constraint spaces.
• Accepts cable up to 2.5mm²
• Symmetrical DIN rail support, offering flexible and versatile safety system installation.
• Local signalling in the form of LEDs.
Protection ratings & Safety features (see datasheet for specifics) -
• Impressive line resistance is available, varying between 90 to 100 Ohm (Ω).
• Input protection type is internal, electronic.
• EN1088/ISO 14119, EN 60204-1, EN/IEC 60947-5-1, EN/ISO 13850
• CSA, TUV & UL listed
• IP 40 (enclosure) for protection against small objects up to 1mm such as tools, wires and small wires.
• IP 20 (terminals) for protection against solid objects such as fingers, smaller tools up to 12mm.
• -25 to 60°C temperature range for operation, suitable in varying levels of heat/freezing temperatures.
• Monitoring of a movable guard, with emergency stop monitoring 1 or 2 channel wiring usable.
• Configurable type of start is readily available for the type of activation you wish for your circuit.
• Monitoring of single safety functions, providing an automated solution for use with applications such as emergency push stop buttons or switches.
• Unlimited synchronisation between time inputs.
• Slin in design, with just 22.5mm of width meaning it can fit nicely even in space constraint spaces.
• Accepts cable up to 2.5mm²
• Symmetrical DIN rail support, offering flexible and versatile safety system installation.
• Local signalling in the form of LEDs.
Protection ratings & Safety features (see datasheet for specifics) -
• Impressive line resistance is available, varying between 90 to 100 Ohm (Ω).
• Input protection type is internal, electronic.
• EN1088/ISO 14119, EN 60204-1, EN/IEC 60947-5-1, EN/ISO 13850
• CSA, TUV & UL listed
• IP 40 (enclosure) for protection against small objects up to 1mm such as tools, wires and small wires.
• IP 20 (terminals) for protection against solid objects such as fingers, smaller tools up to 12mm.
• -25 to 60°C temperature range for operation, suitable in varying levels of heat/freezing temperatures.
Applications -
All dangerous machinery requires an automated solution to prevent harm to immediate users and also prevent damage to the machinery. Below are some of the safety applications
• Coded Magnetic Switch (CMS) to prevent tampering by unauthorised users.
• Time delay input if needed allowing you to set up your own time function.
• Light curtains / Two-hand control safety circuits
• Sensing mats and edges
• Coded Magnetic Switch (CMS) to prevent tampering by unauthorised users.
• Time delay input if needed allowing you to set up your own time function.
• Light curtains / Two-hand control safety circuits
• Sensing mats and edges
Standards
IEC 204-1; EN 292; EN 418; EN 60204-1; EN 1088
Approvals
BG, UL, CSA
XPSAF5130P Schneider Electric Preventa Safety Relay Module.
- Preventa safety module XPSAF.
- For emergency stop and switch monitoring.
- Configurable start.
- Captive screw clamp terminals.
- 3 NO instant opening (volt free).
- No additional circuits.
- Supply voltage 24 V ac/dc.
- Unlimited time between inputs.
- 60/60 Hz frequency.
- Maximum power consumption (VA) 5 VA AC.
- Maximum line resistance 90 Ohm.
- Breaking 1.5 A at 24 V (DC-13).
- Minimum output current 10 MA (relay output).
- Minimum output voltage 17 V (relay output).
- Maximum response time 40 Ms (input open).
- 3 LEDs.
- Mounting 35 mm DIN rail.
- Net weight 0.25 Kg.
Relay Module Functions.
- Monitoring of a movable guard, Emergency stop monitoring 2-channel wiring, Emergency stop monitoring 1-channel wiring.
Spécifications
Attribut | Valeur |
|---|---|
| Supply Voltage | 24V ac/dc |
| Number of Channels | 1, 2 |
| Safety Contacts | 3 |
| Function | Safety Switch/Interlock |
| Range | Preventa |
| Safety Category ISO 13849-1 | 4 |
| PL ISO 13849-1 | e |
| SIL IEC 61508 | 3 |
| Terminal Type | Screw |
| Configurable | Yes |
| Depth | 114mm |
| Width | 22.5mm |
| Series | XPS AF |
| Performance Level | e |
| Length | 99mm |