INA, IR75X85X54-XL
- N° de stock RS:
- 194-7106
- Référence fabricant:
- IR75X85X54-XL
- Fabricant:
- INA
En cours d'approvisionnement - expédition le 30/05/2024, livraison sous 4 jour(s)
Ajouté
Prix la pièce
85,00 €
(TVA exclue)
102,85 €
(TVA incluse)
| Unité | Prix par unité |
| 1 - 4 | 85,00 € |
| 5 - 9 | 79,22 € |
| 10 - 24 | 77,61 € |
| 25 + | 75,90 € |
- N° de stock RS:
- 194-7106
- Référence fabricant:
- IR75X85X54-XL
- Fabricant:
- INA
Documentation technique
Législations et de normes
Détails du produit
Inner rings are used where:
The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)
Needle roller bearings must be combined with wider inner rings in order to allow larger axial displacements of the shaft in relation to the housing (e.g. in bearings with a non-locating bearing function)
Optimum running surfaces are required for seal lips
The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)
Needle roller bearings must be combined with wider inner rings in order to allow larger axial displacements of the shaft in relation to the housing (e.g. in bearings with a non-locating bearing function)
Optimum running surfaces are required for seal lips