3M Secure Click Inhale & Exhale Valve, H

  • N° de stock RS 190-1906
  • Référence fabricant HF-800-02
  • Fabricant 3M
Documentation technique
Législations et de normes
Statut RoHS non applicable
Pays d'origine : PL
Détails du produit

3M™ Secure Click ™ HF-800-02, Inhalation and Exhalation Valve

The 3M™ Secure Click™ HF-800-02 is a replacement inhalation and exhalation valve for the HF-800 series respiratory half-face masks. HF-800-02 valve is easy to install and whilst extending the life of your respiratory protection, thus saving costs.

Replacement inhalation & exhalation valves for 3M™ Secure Click™ Half Facepiece Respirators HF-800SD Series The 3M™ Secure Click™ Inhale & Exhale Valve HF-800-02 is a replacement part for 3M™ Secure Click Half Facepiece Respirators HF-801SD, HF-802SD, HF-803SD (sold separately). Replacement valve is easy to install and can extend the service life of respiratory protection equipment and potentially result in cost savings.

Features and Benefits

• Replacement part for 3M ™ Secure Click ™ Half Face Masks
• The HF-800-02 valve is used for both inhalation and exhalation in the HF-800 series of face masks
• The exhalation valve helps to direct exhaled breath and moisture downwards
• The inhalation valve allows filtered air through the mask
• Helps make the respirator meet the legal performance requirements
• Replacing a part may lead to cost savings on respiratory protection

Applications

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C

Half-mask or full-mask respirators?

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

Spécifications
Attribut Valeur
Type Fit Test Kit
For Use With 3M 800 Series Respirator
6 En stock pour livraison sous 1 jour(s)
Prix Each
3,99
(TVA exclue)
4,83
(TVA incluse)
Unité
Prix par unité
1 +
3,99 €