- N° de stock RS:
- 689-114
- Référence fabricant:
- 253.15
- Fabricant:
- Huco
116 En stock pour livraison sous 1 jour(s)
Ajouté
Prix L'unité (en paquet de 2)
5,17 €
(TVA exclue)
6,26 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
2 - 8 | 5,17 € | 10,34 € |
10 - 18 | 4,98 € | 9,96 € |
20 - 48 | 4,865 € | 9,73 € |
50 + | 4,755 € | 9,51 € |
*prix conseillé |
- N° de stock RS:
- 689-114
- Référence fabricant:
- 253.15
- Fabricant:
- Huco
Documentation technique
Législations et de normes
- Pays d'origine :
- GB
Détails du produit
Bore reducers
These bore reducers are designed for use with universal joints, nickel bellows seals and shaft couplings.
They allow the bore diameter to be adjusted, increasing the range of diameters available.
When fitted to hubs with a stop screw, the reducers act as an annular flange, so no marks are left on the shaft.
Shafts can be removed or repositioned repeatedly without touching the reducers, which remain in the hubs.
They allow the bore diameter to be adjusted, increasing the range of diameters available.
When fitted to hubs with a stop screw, the reducers act as an annular flange, so no marks are left on the shaft.
Shafts can be removed or repositioned repeatedly without touching the reducers, which remain in the hubs.
Note
D: Hub diameter
B1: Shaft diameter
L: Length
B1: Shaft diameter
L: Length
Spécifications
Attribut | Valeur |
---|---|
Shaft Diameter | 3mm |
Outside Diameter | 6.35mm |
Length | 6.6mm |
Material | Brass |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +60°C |