- N° de stock RS:
- 125-3570
- Fabricant:
- RS PRO
Produit discontinué
- N° de stock RS:
- 125-3570
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- GB
Détails du produit
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Applications
The EQi controller's compact dimensions, ease of installation and efficency make it suitable for a broad range of applicatiosn including
Research and development
Laboratory equipment
Prototyping
Production equipment
Research and development
Laboratory equipment
Prototyping
Production equipment
Spécifications
Attribut | Valeur |
---|---|
Compatible Pump Type | Brushless Micropump |
Supply Voltage | 12 → 30 V dc |
Connection | 2 Screw Terminal (Input), 3 Screw Terminal (Output) |
Maximum Fluid Temperature | +80°C |
Maximum Output Pressure | 0.55bar |