RS PRO Brass Full Bore, 2 Way, Ball Valve, BSP 1 1/2in, 14bar Operating Pressure
- N° de stock RS:
- 812-5191
- Fabricant:
- RS PRO
Produit discontinué
- N° de stock RS:
- 812-5191
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- IT
Détails du produit
Note
Approvals apply to specific configurations only
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
OSHAl (USA)
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Spécifications
Attribut | Valeur |
|---|---|
| Type | Full Bore, 2 Way |
| Ball Material | Chrome Plated Brass |
| Attachment Type | Threaded |
| Thread Standard | BSP |
| Thread Size | 1 1/2in |
| Body Material | Brass |
| Pipe Diameter | 40mm |
| Handle Type | Lever |
| Handle Material | Steel |
| Handle Colour | Blue |
| Operating Pressure | 14bar |