Allen Bradley 836P Series Pressure Sensor, 0bar Min, 13.78bar Max, 4 → 20 mA, Analogue, PNP-NO/NC Output,
- N° de stock RS:
- 136-5997
- Référence fabricant:
- 836P-D2NFGB20PA-D4
- Fabricant:
- Allen Bradley
En cours d'approvisionnement - expédition le 08/07/2024, livraison sous 4 jour(s)
Ajouté
Prix la pièce
482,76 €
(TVA exclue)
584,14 €
(TVA incluse)
Unité | Prix par unité |
1 + | 482,76 € |
- N° de stock RS:
- 136-5997
- Référence fabricant:
- 836P-D2NFGB20PA-D4
- Fabricant:
- Allen Bradley
Documentation technique
Législations et de normes
- Pays d'origine :
- DE
Détails du produit
Allen Bradley 836P Solid-State IO-Link Pressure Sensor
Allen-Bradley 836P series solid-state pressure sensors are capable of measuring pressure of liquid or gases in a rugged, compact housing. The 836P sensors feature embedded IO-Link 1.1 communication protocol, which allows for easy integration while delivering data directly into a control system in an easy-to-use manner.
With a rotatable housing (320°) and head (330°), the flexible 836P display model accommodates the most space-critical applications. And for even greater adjustability, the large visual LED display can be rotated 180º. Additional features include pressure ranges from -1...551 bar (-14.5 psi to 8000 psi), tactile push buttons for easy setup, and an IP67 enclosure rating. 836P sensors have dual PNP or one PNP + one 4 mA to 20 mA output configurations in gauge, absolute or vacuum pressure measurement types with a large selection of process connections.
Features and Benefits
Corrosion resistant 316L stainless steel sensing element
Compact form factor
LED display
IP67 rated
Rotatable housing and head
Available in various process connections
IO-Link communication protocol
Allen Bradley Pressure Sensor, 0 to 13.78 Bar Operating Pressure Range, 450mA Current Rating - 836P-D2NFGB20PA-D4
Use this Allen Bradley pressure sensor from Rockwell Automation to measure the fluid pressures in your industrial equipment. By using a piezoelectric element, it rapidly detects changes in your system's pressures, so you can be sure of reliable monitoring. As it's a gauge pressure sensor, the unit takes readings relative to air pressure to automatically adjust for atmospheric changes. It provides PNP and analogue output signals for wide compatibility with data handling devices. Thanks to its IO-Link protocol, you can conveniently access the sensor's readings from your control system.
Features & Benefits
Short cycle time of 3ms for efficient readings
Accuracy level of ±1% for precise measurements
IP67 rating indicates complete protection against dust and submersion in 1m of water for up to 30 minutes
Easy-to-read LED display turns through 180° to ensure clear visibility from all angles
Accuracy level of ±1% for precise measurements
IP67 rating indicates complete protection against dust and submersion in 1m of water for up to 30 minutes
Easy-to-read LED display turns through 180° to ensure clear visibility from all angles
Standards and Certifications
IEC 61298-2
cULus
UKCA-approved
cULus
UKCA-approved
What service life will I get from this pressure sensor?
This unit has a mechanical service life of 100 million cycles to give you reliable long-term pressure monitoring.
Spécifications
Attribut | Valeur |
---|---|
Pressure Reading Type | Relative |
Minimum Pressure Reading | 0bar |
Maximum Pressure Reading | 13.78bar |
Accuracy | ±1 % |
Output Type | 4 → 20 mA, Analogue, PNP-NO/NC |
Media Measured | Gas, Liquid, Steam |
Process Connection | NPT 1/4 |
Electrical Connection | 4-Pin M12 DC Micro Connector |
Analogue Output | 4 → 20 mA |
Communication Protocol | IO-LINK |
Series | 836P |
Maximum Current | 450 mA |
Supply Voltage | 15 → 35 V dc |
Interface | IO-Link |
Housing Material | Stainless Steel |
Mounting Type | Vertical Mount |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +80°C |
IP Rating | IP65, IP67 |
- N° de stock RS:
- 136-5997
- Référence fabricant:
- 836P-D2NFGB20PA-D4
- Fabricant:
- Allen Bradley