ROHM BM2LB150FJ-CE2, DualLow Side, Low Side Switch Power Switch IC 8-Pin, SOP
- N° de stock RS:
- 184-8276
- Référence fabricant:
- BM2LB150FJ-CE2
- Fabricant:
- ROHM
Produit discontinué
- N° de stock RS:
- 184-8276
- Référence fabricant:
- BM2LB150FJ-CE2
- Fabricant:
- ROHM
Documentation technique
Législations et de normes
Détails du produit
The BM2LB150FJ-C is an automotive 2ch low side switch IC, which has built-in overcurrent limiting circuit, thermal shutdown circuit, and overvoltage (active clamp) protection circuit.
Built-in overcurrent limiting circuit (OCP)
Built-in thermal shutdown circuit (TSD)
Direct control enabled from CMOS logic IC, etc.
Low On resistance RDS(ON) up to 150 mΩ (when VIN=5V, ID=0.5A, Tj=25°C)
Monolithic power management IC with the control block (CMOS) and power MOSFET mounted on a single chip
Surface mount package SOP-J8
Built-in thermal shutdown circuit (TSD)
Direct control enabled from CMOS logic IC, etc.
Low On resistance RDS(ON) up to 150 mΩ (when VIN=5V, ID=0.5A, Tj=25°C)
Monolithic power management IC with the control block (CMOS) and power MOSFET mounted on a single chip
Surface mount package SOP-J8
Spécifications
Attribut | Valeur |
|---|---|
| Power Switch Type | Low Side Switch |
| Power Switch Topology | Low Side |
| Switch On Resistance | 420mΩ |
| Number of Channels | 2 |
| Maximum Operating Supply Voltage | 5.5 V |
| Maximum Operating Current | 10A |
| Power Rating | 2W |
| Mounting Type | Surface Mount |
| Package Type | SOP |
| Pin Count | 8 |
| Maximum Operating Temperature | +150 °C |
| Minimum Operating Temperature | -40 °C |
| Dimensions | 4.9 x 3.9 x 1.37mm |
| Series | IPD Series |
| Automotive Standard | AEC-Q100 |