- N° de stock RS:
- 124-5528
- Référence fabricant:
- 2927
- Fabricant:
- ADAFRUIT INDUSTRIES
4 En stock, livraison sous 1 jour(s) (stock Europe)
15 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
23,49 €
(TVA exclue)
28,42 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 23,49 € |
5 - 9 | 20,99 € |
10 + | 18,80 € |
- N° de stock RS:
- 124-5528
- Référence fabricant:
- 2927
- Fabricant:
- ADAFRUIT INDUSTRIES
Documentation technique
Législations et de normes
- Pays d'origine :
- US
Détails du produit
DC Motor / Stepper Motor FeatherWing
FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.
The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.
You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.
The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.
You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.
- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g
Adafruit FeatherWing Add-On Boards
Spécifications
Attribut | Valeur |
---|---|
For Use With | All Feather Board |
Kit Classification | Add On Board |
Featured Device | ATmega32u4, ATSAM M0, ESP8266 |
Kit Name | FeatherWing Add-On Board |
- N° de stock RS:
- 124-5528
- Référence fabricant:
- 2927
- Fabricant:
- ADAFRUIT INDUSTRIES