- N° de stock RS:
- 218-0246
- Référence fabricant:
- R07-200-RNEG
- Fabricant:
- Norgren
1 En stock, livraison sous 1 jour(s) (stock Europe)
5 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
35,89 €
(TVA exclue)
43,43 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 35,89 € |
5 - 9 | 35,18 € |
10 + | 34,45 € |
- N° de stock RS:
- 218-0246
- Référence fabricant:
- R07-200-RNEG
- Fabricant:
- Norgren
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- MX
Détails du produit
IMI Norgren Pneumatic Pressure Regulator, 0.3 to 3.5 Bar, 25.2m³/h Flow Rate - R07 Series - R07-200-RNEG
This regulator from IMI Norgren keeps the output pressure of a pneumatic circuit constant. It responds quickly and accurately to changes in pressure to make sure compressed air is used efficiently. This keeps your pneumatic components, like compressors, functioning reliably. The component features a zinc alloy body that's corrosion-resistant for an extended service life. This material also retains its dimensional stability under high force, so it can handle a high input pressure of up to 20 bar.
Features & Benefits
• Durable nitrile rubber (NBR) seals are resistant to abrasion and tearing
• Adjusting knob with snap-action lock for improved safety
• Wide operating temperature range of -34°C to +65°C for use with hot and cold compressed air
• Adjusting knob with snap-action lock for improved safety
• Wide operating temperature range of -34°C to +65°C for use with hot and cold compressed air
Applications
• Heating furnaces
• Gas grills
• Medical and dental equipment
• Gas grills
• Medical and dental equipment
Is this a relieving or a non-relieving regulator?
This is a non-relieving regulator that stops the flow of compressed air when the pressure in a system becomes too high. It does this by opening a vent, which allows pressure to escape. When pressure returns back to normal, the regulator resets.
Spécifications
Attribut | Valeur |
---|---|
Port Connection | G 1/4 |
Maximum Outlet Pressure | 3.5bar |
Minimum Outlet Pressure | 0.3bar |
Maximum Input Pressure | 20bar |
Manufacturer Series | R07 |
Pressure Gauge Port Size | Rc 1/8 |
Port Connection Thread Size | 1/4 in |
Pressure Gauge Port Thread Size | 1/8 in |
Typical Flow Rate | 25.2m³/h |
Port Connection Thread Standard | G |
Minimum Operating Temperature | -34°C |
Maximum Operating Temperature | +65°C |
Overall Height | 75mm |
Overall Length | 42mm |
Pressure Gauge Port Thread Standard | Rc |