Mitsubishi FX2N Series Counting Module for Use with MELSEC FX2N Series, Encoder, Transistor, 5 → 24 V dc
- N° de stock RS:
- 320-9171
- Référence fabricant:
- FX2N-1HC
- Fabricant:
- Mitsubishi
Produit discontinué
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 320-9171
- Référence fabricant:
- FX2N-1HC
- Fabricant:
- Mitsubishi
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- JP
Détails du produit
High Speed Counter Module for FX2N PLC
This offers an ideal means of interfacing a shaft encoder to an FX2N PLC. It counts 1 or 2 phase (A/B) inputs up to 50kHz and has two 0.5A, 5 to 24Vdc NPN open collector transistor outputs which are controlled independently from the main program cycle. Counting can be enabled or reset by the PLC or external inputs, as can count direction (up/down). The module is powered by the base unit.
Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.
Spécifications
Attribut | Valeur |
|---|---|
| Accessory Type | Counter |
| Series | FX2N |
| Input Type | Encoder |
| Number of Inputs | 8 |
| Output Type | Transistor |
| Number of Outputs | 2 |
| For Use With | MELSEC FX2N Series |
| Supply Voltage | 5 → 24 V dc |
| Output Current | 500 mA |
| Dimensions | 90 x 55 x 87 mm |