RS PRO Retroreflective Photoelectric Sensor, Barrel Sensor, 50 mm → 7 m, PNP, IP67
- N° de stock RS:
- 729-5113
- Numéro d'article Distrelec:
- 304-25-808
- Fabricant:
- RS PRO
Sous-total (1 unité)*
184,55 €
(TVA exclue)
223,31 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 37 unité(s) prête(s) à être expédiée(s)
- Plus 16 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 184,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 729-5113
- Numéro d'article Distrelec:
- 304-25-808
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Sensor Style | Barrel | |
| Product Type | Photoelectric Sensor | |
| Detection Type | Retroreflective | |
| Output Type | PNP | |
| Terminal Type | 4-Pin M12 Connector | |
| Maximum DC Voltage | 30V dc | |
| Light Source | LED | |
| Minimum Operating Temperature | -25°C | |
| Materials Detected | Polymethyl Methacrylate | |
| IP Rating | IP67 | |
| Maximum Current | 100mA | |
| Maximum Operating Temperature | 55°C | |
| Standards/Approvals | No | |
| Response Time | 500μs | |
| Hazardous Area Certification | No | |
| Mount Type | Flange | |
| Housing Material | Nickel Plated Brass, Polycarbonate | |
| Detection Range | 50 mm → 7 m | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Sensor Style Barrel | ||
Product Type Photoelectric Sensor | ||
Detection Type Retroreflective | ||
Output Type PNP | ||
Terminal Type 4-Pin M12 Connector | ||
Maximum DC Voltage 30V dc | ||
Light Source LED | ||
Minimum Operating Temperature -25°C | ||
Materials Detected Polymethyl Methacrylate | ||
IP Rating IP67 | ||
Maximum Current 100mA | ||
Maximum Operating Temperature 55°C | ||
Standards/Approvals No | ||
Response Time 500μs | ||
Hazardous Area Certification No | ||
Mount Type Flange | ||
Housing Material Nickel Plated Brass, Polycarbonate | ||
Detection Range 50 mm → 7 m | ||
- Pays d'origine :
- CN
SICK Photoelectric Sensor, IP67, PNP Output Type - VL180-2P42431F38
This photoelectric sensor is a retro-reflective detector designed for industrial automation applications. It provides object detection using an LED light source and is housed in a Compact barrel form suitable for flange mounting in machinery and control systems. The unit is built to operate across a wide ambient temperature range and connects via a 4‑pin M12 electrical interface.
Features & Benefits
• IP67 enclosure for use in dusty or wet workplaces
• PNP switching output for direct PLC interfacing
• 500μs response time for Rapid detection and control
• Operates from 0 to 30 V DC for low-voltage systems
• Withstands currents up to 100mA to drive typical loads
• Nickel‑plated brass and polycarbonate body for mechanical resilience
• PNP switching output for direct PLC interfacing
• 500μs response time for Rapid detection and control
• Operates from 0 to 30 V DC for low-voltage systems
• Withstands currents up to 100mA to drive typical loads
• Nickel‑plated brass and polycarbonate body for mechanical resilience
**Applications**
• Suitable for presence detection of polymethyl methacrylate parts on conveyor lines
• Ideal for assembly stations requiring fast object sensing
• Used with automated sorting equipment in electronics manufacturing
• Can be used for end‑of‑travel sensing on Compact actuators
• Ideal for assembly stations requiring fast object sensing
• Used with automated sorting equipment in electronics manufacturing
• Can be used for end‑of‑travel sensing on Compact actuators
What connector type allows for quick field wiring?
It uses a 4‑pin M12 connector to simplify installation and replacement.
How does the sensor cope with temperature variations on plant?
The device is rated to operate between −25°C to 55°C to suit typical indoor industrial environments.
What materials is the detector able to sense reliably?
The optical arrangement is suitable for detecting items MADE from polymethyl methacrylate when used with a retro‑reflective target.
Liens connexes
- BALLUFF Retroreflective Photoelectric Sensor 7 m IP67
- SICK Retroreflective Photoelectric Sensor 7 m IP67
- Baumer Retroreflective Photoelectric Sensor 7 m IP67
- RS PRO Retroreflective Photoelectric Sensor 50 mm → 7 m IP67
- ifm electronic Retroreflective Photoelectric Sensor 50 mm → 2 m IP67
- SICK Retroreflective Photoelectric Sensor 50 mm → 7 m IP67
- Banner Retroreflective Photoelectric Sensor 10 m IP67
- Banner Polarised Retroreflective Photoelectric Sensor PNP, IP67