- N° de stock RS:
- 387-0830
- Référence fabricant:
- PER100
- Fabricant:
- Instruments Direct
12 En stock, livraison sous 1 jour(s) (stock Europe)
220 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix 1 ruban de 50
17,07 €
(TVA exclue)
20,65 €
(TVA incluse)
Tube(s) | le tube | Prix par unité* |
1 + | 17,07 € | 0,341 € |
*prix conseillé |
- N° de stock RS:
- 387-0830
- Référence fabricant:
- PER100
- Fabricant:
- Instruments Direct
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- US
Détails du produit
Peroxide Test Strips
From Instruments Direct, a pack of individual peroxide test strips designed for measuring the levels of peroxide present in water or a solution. The peroxide strips are made from a plastic section with a sealed test paper in the tip. These testing strips are easy to use and provide accurate results within 10 seconds.
What is Peroxide used for?
Due to its excellent disinfectant and sanitizing properties, peroxide is used in a wide range of industries as an efficient cleaner. It is used to disinfect machinery and clean hard surfaces, peroxide also an effective stain remover.
How to use the Test Strip
Take a single testing strip and briefly dip the end into the solution or sample of water to be tested.
Remove strip from solution and carefully shake off any excess liquid
Expose the indicator tip to the air and wait for ten seconds
Compare the test strip with the supplied colour chart
Full range from 0, 1, 3, 10, 30 and 100 ppm. The colour chart goes from white to blue dependant on levels detected.
Remove strip from solution and carefully shake off any excess liquid
Expose the indicator tip to the air and wait for ten seconds
Compare the test strip with the supplied colour chart
Full range from 0, 1, 3, 10, 30 and 100 ppm. The colour chart goes from white to blue dependant on levels detected.
Features and Benefits
Accurate, rapid results
Easy and simple to use
Dip and read in seconds
Supplied in a compact airtight container
50 single-use strips
Easy and simple to use
Dip and read in seconds
Supplied in a compact airtight container
50 single-use strips
Applications
Test strips are generally used to test for any remaining residues after the cleaning process. If the test strips remain white production can continue. If the strips display any indication of blue more cleaning is required. Some of the most common applications and environments for single use test strips are
Food and Beverage
Hospitals and laboratories
The printed circuit board and Semi-conductor manufacturing - etching
Paper manufacturing - whitens the paper pulp
Hospitals and laboratories
The printed circuit board and Semi-conductor manufacturing - etching
Paper manufacturing - whitens the paper pulp
Note
Range 0, 1, 3, 10, 50 and 100ppm has replaced the former Range: 0, 1, 3, 10, 30 and 100ppm.
Supplied with
Colour chart
Spécifications
Attribut | Valeur |
---|---|
Strip Type | Peroxide |
Multiple Parameter | Single |
Maximum Measurement | 100ppm |
Number of Strips | 50 |
- N° de stock RS:
- 387-0830
- Référence fabricant:
- PER100
- Fabricant:
- Instruments Direct
Statut RoHS non applicable
- Pays d'origine :
- US