- N° de stock RS:
- 805-5623
- Référence fabricant:
- 172828 P3-100/M4/K2-PR/N
- Fabricant:
- Eaton
7 En stock pour livraison sous 1 jour(s)
Ajouté
Prix la pièce
231,00 €
(TVA exclue)
279,51 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 231,00 € |
5 - 11 | 223,93 € |
12 + | 216,68 € |
- N° de stock RS:
- 805-5623
- Référence fabricant:
- 172828 P3-100/M4/K2-PR/N
- Fabricant:
- Eaton
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- GB
Détails du produit
Eaton Isolator Switch, 690V AC Voltage Rating, Metal Extension Shaft - P3 Series - 172828 P3-100/M4/K2-PR/N
Boost user safety when servicing electrical equipment with the help of this isolator switch from Eaton. It lets you disconnect the specific components you need to work on, so there's no need to shut down the rest of your setup. The red handle stands out against a yellow base, so it's easy to spot the unit in an emergency. As it's rated to overvoltage category III, the device withstands electrical surges of up to 6000V AC, making is suitable for use on factory floors or heavy engineering plants.
Features & Benefits
• Includes a robust metal extension shaft to fit electrical cabinets up to 600mm deep
• Sturdy thermoplastic housing provides IP65-rated protection against dust and water spray from all directions
• Uninterrupted current rating of 100A makes it suitable for use with industrial machinery
• Manual override function for quick shutdown in an emergency
• Operating temperature range between -25°C and +50°C, meaning it stands up to challenging conditions
• Sturdy thermoplastic housing provides IP65-rated protection against dust and water spray from all directions
• Uninterrupted current rating of 100A makes it suitable for use with industrial machinery
• Manual override function for quick shutdown in an emergency
• Operating temperature range between -25°C and +50°C, meaning it stands up to challenging conditions
What's included in this set?
As well as a 3P+N isolator switch, you get a metal extension shaft and lockable handle.
Does this isolator switch use fuses?
No, this design uses a switch to isolate circuits without any need for replacing a fuse each time.
Note
Eaton formerly known as Moeller
Spécifications
Attribut | Valeur |
---|---|
Number of Poles | 3P+N |
Maximum Current | 100A |
Mounting Type | Panel Mount |
IP Rating | IP65 |
Power Rating | 45kW |
Voltage Rating | 690V ac |
Accepts Padlocks | Yes |
Handle Colour | Red |
Series | Eaton Moeller |
Normal State Configuration | NO |
Enclosed/Not Enclosed | Enclosed |
Switch Rating | 520A |
Length | 340mm |
Width | 100mm |
Depth | 84mm |
Terminal Type | Screw |
Minimum Operating Temperature | -25°C |
Throw Configuration | Single |
Maximum Operating Temperature | +55°C |