- N° de stock RS:
- 621-7838
- Référence fabricant:
- 280897 P5-125/E
- Fabricant:
- Eaton
En cours d'approvisionnement - expédition le 04/06/2024, livraison sous 4 jour(s)
Ajouté
Prix la pièce
209,52 €
(TVA exclue)
253,52 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 209,52 € |
5 - 11 | 203,12 € |
12 + | 196,54 € |
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 621-7838
- Référence fabricant:
- 280897 P5-125/E
- Fabricant:
- Eaton
Documentation technique
Législations et de normes
- Pays d'origine :
- DE
Détails du produit
Eaton Panel Mount Isolator Switch
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions are when used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Rated uninterrupted current of up to 32 A
Lockable in the 0/OFF position, with up to three padlocks
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Common accessories: 262-3784, 219-1445, 219-1439
Used as an emergency switching off/emergency stop device
The basic functions are when used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Rated uninterrupted current of up to 32 A
Lockable in the 0/OFF position, with up to three padlocks
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Common accessories: 262-3784, 219-1445, 219-1439
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Note
Eaton formerly known as Moeller
Spécifications
Attribut | Valeur |
---|---|
Number of Poles | 3P |
Maximum Current | 125A |
Mounting Type | Panel Mount |
IP Rating | IP65 |
Power Rating | 45kW |
Voltage Rating | 415V ac |
Electrical Phase | 3 |
Handle Colour | Black |
Series | Eaton Moeller |
Auxiliary Contacts Available | Yes |
Normal State Configuration | NO |
Switch Rating | 2500A |
Length | 112mm |
Width | 88mm |
Depth | 91mm |
Terminal Type | Screw |
Throw Configuration | Single |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +50°C |
- N° de stock RS:
- 621-7838
- Référence fabricant:
- 280897 P5-125/E
- Fabricant:
- Eaton