Vous avez été redirigé(e) vers RS Belgique
Distrelec a fusionné avec RS Group afin de vous proposer une gamme de produits plus étendue, une assistance locale et des services de pointe.
Pomona 6601 Test Probe Kit, CAT III, 10A
- N° de stock RS:
- 221-8269
- Numéro d'article Distrelec:
- 301-80-015
- Référence fabricant:
- 6601
- Fabricant:
- Pomona
Sous-total (1 unité)*
37,00 €
(TVA exclue)
44,77 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s)
- Plus 28 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 37,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 221-8269
- Numéro d'article Distrelec:
- 301-80-015
- Référence fabricant:
- 6601
- Fabricant:
- Pomona
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Pomona | |
| Lead Type | Test Probe Kit | |
| Product Type | Multimeter Test Lead | |
| Current | 10A | |
| Connector Type | Banana Jack | |
| Lead Length | 2mm | |
| Safety Category Voltage | 1kV | |
| Safety Category Level | CAT III | |
| Standards/Approvals | CE, UL, IEC 10102031 | |
| Sélectionner tout | ||
|---|---|---|
Marque Pomona | ||
Lead Type Test Probe Kit | ||
Product Type Multimeter Test Lead | ||
Current 10A | ||
Connector Type Banana Jack | ||
Lead Length 2mm | ||
Safety Category Voltage 1kV | ||
Safety Category Level CAT III | ||
Standards/Approvals CE, UL, IEC 10102031 | ||
- Pays d'origine :
- TW
Fluke Multimeter Test Lead, 10A Current, 2mm Lead Length - 6601
This multimeter test lead is a silicone-insulated probe kit designed for electrical measurement on meters fitted with sheathed banana jacks. It provides insulated probe handles and removable banana plug adapters for use in industrial and field environments where up to 1000 V operating voltage is present. The leads are built for flexible routing and repeated insertion cycles while carrying currents up to 10 A.
Features and Benefits:
• 10 A current rating enables higher-load measurement capability
• 1000 V operating voltage supports high-voltage testing
• IEC 1010-2-031 CAT III safety level suitable for industrial environments
• 2 mm notched pin tip improves contact with small terminals
• Silicone high-strand wire for exceptional flexibility at temperature
• 1000 V operating voltage supports high-voltage testing
• IEC 1010-2-031 CAT III safety level suitable for industrial environments
• 2 mm notched pin tip improves contact with small terminals
• Silicone high-strand wire for exceptional flexibility at temperature
Applications
• Suitable for measurements on distribution panels and switchgear
• Used with handheld DMMs featuring sheathed banana jacks
• Ideal for onsite electrical troubleshooting and maintenance
• Can be used for component-level probing on industrial control equipment
• Used with handheld DMMs featuring sheathed banana jacks
• Ideal for onsite electrical troubleshooting and maintenance
• Can be used for component-level probing on industrial control equipment
What materials are used for the probe handle and tip?
The handle uses a Santoprene® rubber and polypropylene combination while the tip is nickel-plated brass.
How is pull strength ensured at the wire terminations?
The probe body and banana plug are moulded directly to the wire to provide superior pull retention.
What connector types are provided with the leads?
Sheathed 4 mm banana plugs are supplied with removable adapters to convert the notched pin probe for use with banana jacks.
How long are the leads and what conductor specification is used?
The pair uses 18 AWG silicone-insulated wire and the standard length supplied is 48 (1.2 m).