A4 316 Stainless Steel Mudguard Washers, M10
- N° de stock RS:
- 660-4778
- Fabricant:
- RS PRO
11 En stock, livraison sous 1 jour(s) (stock Europe)
117 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix 1 sachet de 50
14,62 €
(TVA exclue)
17,69 €
(TVA incluse)
| Sachet(s) | Le Sachet | Prix par unité* |
| 1 - 4 | 14,62 € | 0,292 € |
| 5 - 9 | 13,90 € | 0,278 € |
| 10 - 29 | 13,15 € | 0,263 € |
| 30 + | 12,27 € | 0,245 € |
| *prix conseillé | ||
- N° de stock RS:
- 660-4778
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
Détails du produit
RS PRO Plain Stainless Steel Mudguard Washer, M10 x 30 mm, 1.5 mm Thickness
Use this mudguard washer from RS PRO when installing a bolt or screw into an oversized hole. It's made of corrosion-resistant A4 316 stainless steel, so it's suitable for use in a wide range of demanding environments.
The washer has a diameter coverage area of 30 mm, so it evenly distributes loads and covers excess space for a more secure fixing. There's no need to worry about denting or damage to your surfaces, as the tough steel material is thick enough to resist tightly screwed nuts.
The mudguard washer has a 10.5 mm internal hole diameter, making it suitable for use with M10 fittings or screws. This type of washer is used for a wide range of purposes, from boat and bicycle repair to fabricating roofs.
The washer has a diameter coverage area of 30 mm, so it evenly distributes loads and covers excess space for a more secure fixing. There's no need to worry about denting or damage to your surfaces, as the tough steel material is thick enough to resist tightly screwed nuts.
The mudguard washer has a 10.5 mm internal hole diameter, making it suitable for use with M10 fittings or screws. This type of washer is used for a wide range of purposes, from boat and bicycle repair to fabricating roofs.
Features and Benefits
- Plain finish
- For screw/bolt size of M10
- Inside diameter of 10.5 mm
- Stainless steel material
- Outside diameter of 30 mm
- A4 316 stainless steel type
- Thickness of 1.5 mm
- Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards
Spécifications
Attribut | Valeur |
|---|---|
| For Screw/Bolt Size | M10 |
| Washer Type | Mudguard |
| Inside Diameter | 10.5mm |
| Outside Diameter | 30mm |
| Material | Stainless Steel |
| Stainless Steel Type | A4 316 |
| Finish | Plain |
| Thickness | 1.5mm |