- N° de stock RS:
- 161-2707
- Référence fabricant:
- 32962
- Fabricant:
- CRC
- N° de stock RS:
- 161-2707
- Référence fabricant:
- 32962
- Fabricant:
- CRC
Documentation technique
Législations et de normes
- Pays d'origine :
- BE
Détails du produit
Balanced formulation to provide an excellent slip during demoulding without contaminating transparent surfaces by product transfer. Ideal for use with transparent plastics such as Polycarbonate, ABS and polyamides.
Ideal for mould applications where fine details and precision are requested
Will not stop post moulding operations (anti reflection coatings , gluing anti-fog screens,...)
Contains Zinc Stearate which results in excellent slip properties
Will not stop post moulding operations (anti reflection coatings , gluing anti-fog screens,...)
Contains Zinc Stearate which results in excellent slip properties
Features
NSR Ultra Thin contains Zin Stearate which gives a first rate slip at the parts to be demoulded.
The aerosol allows to apply a precise and ultra thin layer, not to disturb fine details.
Allows fast mould exchanges as new moulds dont have to be degreased before application.
Flashes off condense due to temperature changes on new moulds coming into production.
The aerosol allows to apply a precise and ultra thin layer, not to disturb fine details.
Allows fast mould exchanges as new moulds dont have to be degreased before application.
Flashes off condense due to temperature changes on new moulds coming into production.
Applications
NSR Ultra Thin is formulated without silicones to allow post moulding operations.
When fine details are moulded, the ultra thin layer does not disturb the moulds geometry.
Demoulding of transparent plastics (optical). The very limited transfer assures that the moulded parts are not contaminated with the release agent.
Complex parts in rigid plastics might give some difficulties during demoulding. The extra slip from the NSR Ultra Thin (comparable to the slip of silicone oils) allows an easy and fast demoulding.
During fast mould exchanges, the protective oils do not have to be cleaned. The NSR Ultra Thin absorbs oils and grease remnants.
When fine details are moulded, the ultra thin layer does not disturb the moulds geometry.
Demoulding of transparent plastics (optical). The very limited transfer assures that the moulded parts are not contaminated with the release agent.
Complex parts in rigid plastics might give some difficulties during demoulding. The extra slip from the NSR Ultra Thin (comparable to the slip of silicone oils) allows an easy and fast demoulding.
During fast mould exchanges, the protective oils do not have to be cleaned. The NSR Ultra Thin absorbs oils and grease remnants.
Directions
Can be applied directly on a mould without prior cleaning.
Diffuse a uniform layer on the mould when at room temperature.
Allow drying.
Repeat as soon as moulding starts to get difficult.
Diffuse a uniform layer on the mould when at room temperature.
Allow drying.
Repeat as soon as moulding starts to get difficult.
Spécifications
Attribut | Valeur |
---|---|
Package Size | 500 ml |
Base Material | Non-Silicone |
Compatible Materials | ABS, PA, PC, Plastic |
Trade Name | NSR Ultra Thin |