Baumer G 305 Series Optical Incremental Encoder, 20 ppr, HTL/Push Pull Signal, Solid Type, 7mm Shaft
- N° de stock RS:
- 181-1508
- Référence fabricant:
- G 305.010A101000
- Fabricant:
- Baumer
Produit discontinué
- N° de stock RS:
- 181-1508
- Référence fabricant:
- G 305.010A101000
- Fabricant:
- Baumer
Documentation technique
Législations et de normes
- Pays d'origine :
- DE
Détails du produit
G305 series incremental encoders
Range of opto-electronic, compact encoders with NPN and PNP-compatible outputs.
These encoders record and measure movement, lengths, angles, speeds of rotation etc.
They are particularly effective when used in conjunction with a tachometer to measure speed.
Output signal on Darlington FET transistor.
Screw mounting.
Cables are fitted with a DIN 5-point connector in various lengths. Must be ordered separately.
These encoders record and measure movement, lengths, angles, speeds of rotation etc.
They are particularly effective when used in conjunction with a tachometer to measure speed.
Output signal on Darlington FET transistor.
Screw mounting.
Cables are fitted with a DIN 5-point connector in various lengths. Must be ordered separately.
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Short circuit protection
Age and temperature compensation
Spécifications
Attribut | Valeur |
|---|---|
| Encoder Technology | Optical |
| Pulses Per Revolution | 20 |
| Series | G 305 |
| Maximum Revolutions | 6000rpm |
| Output Signal Type | HTL/Push Pull |
| Shaft Type | Solid |
| Supply Voltage | 10 → 30 V dc |
| Shaft Diameter | 7mm |
| IP Rating | IP30 |
| Overall Width | 62mm |
| Overall Depth | 62mm |
| Minimum Operating Temperature | 0°C |
| Mounting Type | Surface Mount |
| Maximum Operating Temperature | +60°C |
| Connection Type | Flange connector |
| Switching Frequency | ≤10 kHz |