Legris High Pressure Ball Valve Brass 1/4 in G 2 Way

  • N° de stock RS 282-6501
  • Référence fabricant 0432 07 13
  • Fabricant Legris
Documentation technique
Législations et de normes
Statut RoHS non applicable
Pays d'origine : FR
Détails du produit

In-Line Valves

Valve lockable in open or closed position
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated

//media.rs-online.com/t_line/L282650-01.gif
//media.rs-online.com/t_line/L283016-01.gif

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Spécifications
Attribut Valeur
Attachment Type Threaded
Threaded Connection 1/4 in G
Body Material Brass
Thread Size 1/4in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 8mm
Connection Size inch 1/4in
Type 2 Way
7 En stock pour livraison sous 1 jour(s)
Prix Each
55,55
(TVA exclue)
67,22
(TVA incluse)
Unité
Prix par unité
1 - 4
55,55 €
5 - 9
53,85 €
10 +
52,11 €