Pepperl + Fuchs LVL-A7 Series Limit Switch Level Probe, PNP Output, Flush Mount, Stainless Steel Body

The Pepperl + Fuchs level probe is used for overfill prevention or pump protection in cleaning and filter systems as well as in cooling and lubrication vessels, for instance. The switch has two modes of operation i.e. minimum and maximum. In maximum, the switch contacts remain closed while the liquid level remains beneath the forks. In a minimum, the switch contacts remain open while the forks are submerged in liquid. This switch also works in areas where these measuring principles are not suitable due to conductivity, build-up, turbulence, flow conditions or air bubbles
It has three wire 10 V dc to 35 V dc, PNP electrical output

Switching time is 0.5 seconds
Maximum switching current is 250mA
Suitable for -1bar to 40 bar process pressure
LED status indication
Can be installed in any position
Easy to install even at points difficult to access due to compact design
External function test using test magnet
Large selection of process connections for hassle-free installation in existing systems
Rugged stainless steel housing
Cost-saving plug connections

Condensate tanks
Header tanks
Storage tanks or for providing an alarm for low levels of lubricating oils or fuels

CE certified
Approval as overfill protection and leak detection system acc. to WHG