Vous avez été redirigé(e) vers RS Belgique
Distrelec a fusionné avec RS Group afin de vous proposer une gamme de produits plus étendue, une assistance locale et des services de pointe.
Honeywell Technologies Hall Effect Sensor Snap-in, Digital Output, Block Body, 30 V 30V
- N° de stock RS:
- 370-6903
- Référence fabricant:
- SR13C-A1
- Fabricant:
- Honeywell
Sous-total (1 unité)*
19,10 €
(TVA exclue)
23,11 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 39 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 100 unité(s) expédiée(s) à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 19,10 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 370-6903
- Référence fabricant:
- SR13C-A1
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Output Type | Digital | |
| Product Type | Hall Effect Sensor | |
| Body Style | Block | |
| Terminal Type | Wire Lead | |
| Mount Type | Snap-in | |
| Maximum DC Voltage | 30V | |
| Switching Current | 50mA | |
| Maximum Supply Voltage | 30V | |
| Minimum Operating Temperature | -40°C | |
| Series | SR13 | |
| Width | 20.32mm | |
| Standards/Approvals | No | |
| Length | 7.62mm | |
| Depth | 11.43mm | |
| Maximum Operating Temperature | 150°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Output Type Digital | ||
Product Type Hall Effect Sensor | ||
Body Style Block | ||
Terminal Type Wire Lead | ||
Mount Type Snap-in | ||
Maximum DC Voltage 30V | ||
Switching Current 50mA | ||
Maximum Supply Voltage 30V | ||
Minimum Operating Temperature -40°C | ||
Series SR13 | ||
Width 20.32mm | ||
Standards/Approvals No | ||
Length 7.62mm | ||
Depth 11.43mm | ||
Maximum Operating Temperature 150°C | ||
- Pays d'origine :
- MX
Honeywell SR13 Series Hall Effect Sensor, 30V Maximum DC Voltage, Snap-in Mount Type - SR13C-A1
This Hall effect sensor is a Compact magnetic position switch designed for digital switching tasks in industrial and automotive contexts. It delivers contactless detection of magnetic fields and provides a straightforward on/off output suitable for control and monitoring systems where a robust, snap-in mounting is required.
Features and Benefits:
• Snap-in mount enables Rapid panel or chassis installation • Digital output supports clear binary position signalling • Operates from 0V up to 30V enabling flexible supply integration • Withstands ambient temperatures from -40°C to 150°C for wide-range use • 50mA switching current handles direct low-power loads reliably • Wire-lead terminals simplify harnessing and connection routing
Applications
• Suitable for rotational position sensing in automotive assemblies • Ideal for end-of-travel detection on actuators and valves • Used for tamper or door-closure monitoring in electrical enclosures • Can be used for proximity sensing in automation pick-and-place systems • Used with small motors for commutation or speed feedback tasks
What mounting arrangement does it require for secure fitment?
It uses a snap-in style mount that locates into a suitably sized aperture for mechanical retention without extra fasteners.
How are electrical connections presented for integration?
Connections are provided as wire-lead terminals which allow soldering, crimping, or connector attachment depending on the wiring method.
What environmental extremes can it tolerate during operation?
The device is specified to function at temperatures down to -40°C and up to 150°C, supporting use in cold-start and high-heat conditions.
How much current can it switch directly without additional components?
The switch rating allows up to 50mA of switching current for driving low-power indicators or logic inputs.
Liens connexes
- Honeywell Technologies Hall Effect Sensor Snap-in Block Body, 30 V 30V
- Honeywell Technologies Hall Effect Sensor Snap-in Block Body, 30 V 30V
- Honeywell Technologies Hall Effect Sensor Side Fixed Body, 30 V dc 30V
- Honeywell Technologies Hall Effect Sensor Flange Barrel Body, 24 V dc
- Honeywell Technologies Hall Effect Sensor 30 V
- Honeywell Technologies Hall Effect Sensor Surface Flat Body, 10.5 V dc 10.5V dc
- Honeywell Technologies Hall Effect Sensor Surface Block Body, 10.5 V dc 10.5V
- Honeywell Technologies Hall Effect Sensor Screw Block Body, 30 V dc 10V