Schurter Mounting Bracket Fuseholder Cap

  • N° de stock RS 876-7818
  • Référence fabricant 0697.9201
  • Fabricant Schurter
Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Pays d'origine : US
Détails du produit

Schurter Fuseholder Mounting Accessories

Schurter Fuse Clips can be used in conjunction with schurter fuses to provide primary protection for electronic circuits. Fuse clips are available in a different mounting styles including solder and screw.

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Spécifications
Attribut Valeur
Fuse Holder Accessory Type Fuseholder Cap
Series 697
En cours d'approvisionnement - expédition le 16/10/2020, livraison sous 1 jour(s)
Prix Each (In a Pack of 100)
0,20
(TVA exclue)
0,24
(TVA incluse)
Unité
Prix par unité
le paquet*
100 +
0,20 €
20,00 €
*prix conseillé