Trenz Electronic GmbH TE0712-02-100-2C 1 GByte DDR3, 4 x 5 cm, FPGA Module with Xilinx Artix-7 XC7A100T-2FGG484C Module
- N° de stock RS:
- 176-0803
- Référence fabricant:
- TE0712-02-100-2C
- Fabricant:
- Trenz Electronic GmbH
Produit discontinué
- N° de stock RS:
- 176-0803
- Référence fabricant:
- TE0712-02-100-2C
- Fabricant:
- Trenz Electronic GmbH
Documentation technique
Législations et de normes
- Pays d'origine :
- DE
Détails du produit
Trenz Electronic GmbH Programmable Logic Development Kits
The Trenz electronic is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, a 10/100 Mbit Ethernet transceiver, 1Gb of DDR3 SDRAM, 32Mb flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. It has an electric rating of either 3.3V or 3.3V and 5V.
Features and Benefits:
AES bit-stream encryption
Dual 100Mbit Ethernet Phy
It has 200MHz speed
Lead free
MAC address EEPROM
on-board high efficiency DC-DC converters
Operating temperature ranges between 0°C and 70°C
Plug-on module with two 100-pin hermaphroditic stacking strips
Rugged for shock and high vibration
single-ended FPGA I/O pins available on B2B strips Up to 112
System management and power sequencing
Dual 100Mbit Ethernet Phy
It has 200MHz speed
Lead free
MAC address EEPROM
on-board high efficiency DC-DC converters
Operating temperature ranges between 0°C and 70°C
Plug-on module with two 100-pin hermaphroditic stacking strips
Rugged for shock and high vibration
single-ended FPGA I/O pins available on B2B strips Up to 112
System management and power sequencing
Certifications:
WEEE
Spécifications
Attribut | Valeur |
---|---|
Programmable Logic Technology | FPGA |
Classification | Module |
Kit Classification | Module |
Technology | FPGA |
For Use With | Modules in 4 x 5 cm Form Factors |
Featured Device | TE0712-02 |
Kit Name | 1 GByte DDR3, 4 x 5 cm, FPGA Module with Xilinx Artix-7 XC7A100T-2FGG484C |