Turck, 1 → 150 (Water) cm³/s, 3 → 300 (Oil) cm³/s Flow Controller, M12 Connector, PNP

  • N° de stock RS 313-2431
  • Référence fabricant FCS-G1/2A4-AP8X-H1141
  • Fabricant Turck
Documentation technique
Législations et de normes
Statut RoHS non applicable
Pays d'origine : DE
Détails du produit

Turck Flow Controller Sensor

The Turck flow controller sensor monitors the flow rate of gaseous and liquid media, irrespective of the viscosity and electric conductivity of the medium. Its operating measurement range of water is 1cm/s to 150cm/s and operating measurement range of oil is 3cm/s to 300cm/s. The operation is based on the heat transport/heat loss principle, that is when fluid moves over the heated sensing probe, heat is conducted away from the sensor. It is best suited for industrial use.

Features and Benefits

Flow control and processor incorporated in a single compact housing
Simple adjustment via a potentiometer
Pressure resistance is 100bar
The operating temperature ranges between -20°C and 80°C
Sensor and signal processor in one stainless steel compact housing
On-delay time is 8 seconds (typical)
Ingress protection to IP67
Simple adjustment via an LED bar graph and potentiometer
Response time is 12 seconds (maximum)
Switch on and off times is 2 seconds (typical)
Output - PNP transistor short-circuit proof
reverse polarity protected
4-pin plug


Ingress protection to IP67 rated

Attribut Valeur
Maximum Flow Rate 1 → 150 (Water) cm³/s, 3 → 300 (Oil) cm³/s
Electrical Connection M12 Connector
Control Output PNP
Mounting Style Compact
Supply Voltage 21 → 26 V dc
Display Screen LED
Pipe Diameter Range 1/2 in
Minimum Operating Temperature -25°C
Maximum Operating Temperature +80°C
18 Livraison dès le lendemain
9 Sous 1 jours (stock Europe)
Prix Each
(TVA exclue)
(TVA incluse)
Prix par unité
1 +
340,38 €