- N° de stock RS:
- 104-597
- Fabricant:
- RS PRO
10 En stock, livraison sous 1 jour(s) (stock Europe)
1270 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix L'unité (en paquet de 10)
1,319 €
(TVA exclue)
1,596 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
10 - 90 | 1,319 € | 13,19 € |
100 - 490 | 1,193 € | 11,93 € |
500 - 2490 | 1,038 € | 10,38 € |
2500 - 4990 | 0,888 € | 8,88 € |
5000 + | 0,745 € | 7,45 € |
*prix conseillé |
- N° de stock RS:
- 104-597
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- KR
Détails du produit
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Spécifications
Attribut | Valeur |
---|---|
Voltage Rating | 14 V |
Lamp Base | E5 |
Current Rating | 50 mA |
Diameter | 5.7мм |
Lamp Size | T1 1/2 |
Length | 17.5 mm |
Lens Colour | Clear |
Luminosity | 3 lm |
Life Hours | 1000h |