Banner Fibre Amplifier 1100 mm, PNP, Push Pull Output IO-Link, 960 mW, IP50, 10 → 30 V dc
- N° de stock RS:
- 177-8707
- Référence fabricant:
- DF-G2-KD-Q7
- Fabricant:
- Banner
En cours d'approvisionnement - expédition le 02/07/2024, livraison sous 4 jour(s)
Ajouté
Prix la pièce
310,35 €
(TVA exclue)
375,52 €
(TVA incluse)
| Unité | Prix par unité |
| 1 + | 310,35 € |
- N° de stock RS:
- 177-8707
- Référence fabricant:
- DF-G2-KD-Q7
- Fabricant:
- Banner
Documentation technique
Législations et de normes
Détails du produit
DF-G2 Red Beam High Speed Dual Display Fiber Amplifier
Range: Depends on fiber Input 10-30 V dc
Output: 1 PNP with IO-Link Communication: 1 PNP
Pico M8 4-pin Integral Connector
Range: Depends on fiber Input 10-30 V dc
Output: 1 PNP with IO-Link Communication: 1 PNP
Pico M8 4-pin Integral Connector
Spécifications
Attribut | Valeur |
|---|---|
| Detection Range | 1100 mm |
| Output Type | PNP, Push Pull |
| Terminal Type | Cable |
| Response Time | 1000 (Long Range) μs, 2000 (Long Range with Immunity) μs, 250 (Standard) μs, 50 (Fast) μs, 500 (Medium Range) μs |
| Light Source | Red LED |
| Electrical Connection | 4-Wire |
| Communication Protocol | IO-LINK |
| Power Consumption | 960 mW |
| IP Rating | IP50 |
| Housing Material | Thermoplastic |
| Supply Voltage | 10 → 30 V dc |
| Length | 86.3mm |
| Width | 10mm |
| Interface | IO-Link |
| Mounting Type | DIN Rail |
| Minimum Operating Temperature | -10°C |
| Depth | 31.5mm |
| Standards Met | CE Certified, cULus Listed |
| Maximum Operating Temperature | +55°C |
| Dimensions | 86.3 x 10 x 31.5 mm |