- N° de stock RS:
- 122-4832
- Référence fabricant:
- KSZ8061RNBW
- Fabricant:
- Microchip
Article en cours d'approvisionnement. Merci de bien vouloir nous contacter.
Ajouté
Prix L'unité (en paquet de 4)
2,368 €
(TVA exclue)
2,865 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
4 - 16 | 2,368 € | 9,472 € |
20 - 44 | 2,183 € | 8,732 € |
48 - 196 | 2,118 € | 8,472 € |
200 + | 2,073 € | 8,292 € |
*prix conseillé |
- N° de stock RS:
- 122-4832
- Référence fabricant:
- KSZ8061RNBW
- Fabricant:
- Microchip
Documentation technique
Législations et de normes
Détails du produit
KSZ8061R 10/100 Ethernet Transceiver
The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016R variant features a Reduced Media Independent Interface (RMII) interface to connect with Ethernet MAC Processors and Switches.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016R variant features a Reduced Media Independent Interface (RMII) interface to connect with Ethernet MAC Processors and Switches.
Features
Quiet-WIRE® Programmable EMI Filter
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Ethernet Communications - Microchip
Spécifications
Attribut | Valeur |
---|---|
IC Type | Transceiver IC |
Data Rate | 10 Mbps, 100Mbps |
Number of Transceivers | 1 |
Standard Supported | IEEE 802.3az |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 32 |
Typical Operating Supply Voltage | 3.3 V |
Dimensions | 5 x 5 x 0.95mm |
Maximum Operating Temperature | +105 °C |
Minimum Operating Temperature | -40 °C |