- N° de stock RS:
- 912-2941
- Référence fabricant:
- ENC28J60-I/SS
- Fabricant:
- Microchip
141 En stock pour livraison sous 1 jour(s)
Ajouté
Prix L'unité (dans un tube de 47)
3,48 €
(TVA exclue)
4,21 €
(TVA incluse)
Unité | Prix par unité | le tube* |
47 - 94 | 3,48 € | 163,56 € |
141 + | 3,393 € | 159,471 € |
*prix conseillé |
- N° de stock RS:
- 912-2941
- Référence fabricant:
- ENC28J60-I/SS
- Fabricant:
- Microchip
Documentation technique
Législations et de normes
- Pays d'origine :
- US
Détails du produit
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
- 10BASE-T
- Integrated MAC and PHY
- 10Mbps bandwidth
- IEEE 802.3 compatible
- SPI interface with clock speeds up to 25Mhz
- Supports MAC Unicast, Multicast and Broadcast packets
- PHY loopback mode and programmable outputs
Applications:
- Security
- Instrumentation
- Home control
- Building automation
- Industrial automation
- VoIP
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip
Spécifications
Attribut | Valeur |
---|---|
Physical Network Type | 10BaseT |
Host Interface | Serial-SPI |
IC Type | Controller IC |
Network Interface | MII, MIIM |
Communication Mode | Full Duplex, Half Duplex |
Data Rate | 10Mbps |
Loopback Mode | Internal |
Standard Supported | IEEE 802.3 |
Mounting Type | Surface Mount |
Package Type | SSOP |
Pin Count | 28 |
DMA Support | Yes |
Typical Operating Supply Voltage | 3.3 V |
Dimensions | 10.5 x 5.6 x 1.85mm |
Minimum Operating Temperature | -40 °C |
Maximum Operating Temperature | +85 °C |